Page 1 of 2 12 LastLast
Results 1 to 20 of 31

Thread: FreeBSD 9.0

  1. #1
    Join Date
    May 2005
    Location
    Montreal, QC, Canada
    Posts
    110

    FreeBSD 9.0

    Perhaps it's time to open up a "FreeBSD 9.x BETA" sub-forum and retire/merge the other release subs?

    I have a feeling 9.0-RELEASE is around the corner, as the code is frozen.

    p.s. I can beta test with a trial license if needed. :P
    FreeBSD <3

  2. #2
    Hello,

    We don't start DA development on an OS until it's "stable".
    So once FreeBSD 9 is out, we'll start the process of building a box, setting up DA, etc..

    John

  3. #3
    Hello,

    We don't start DA development on an OS until it's "stable".
    So once FreeBSD 9 is out, we'll start the process of building a box, setting up DA, etc..

    John

  4. #4
    Join Date
    May 2005
    Location
    Montreal, QC, Canada
    Posts
    110
    Hi, 9.0-RELEASE is out.
    FreeBSD <3

  5. #5
    Hello,

    If anyone has a test box (FreeBSD 9, 64-bit), let me know, and I'll see if the current binaries work on it.
    If they do, then we're only a few steps from beta.
    If they don't, I'll have to setup a new box (many more steps).

    John

  6. #6
    Join Date
    Oct 2004
    Location
    London, UK
    Posts
    6,641
    John, if you need a test box with FreeBSD 9 i can setup it and send you access data for your tests.

    Let me know here or via e-mail at support@crazynetwork.it

    Regards
    SeLLeRoNe - Andrea Iannucci
    DevOps Engineer - System Administrator
    If you need my support write me an E-Mail to Support@CrazyNetwork.it

  7. #7
    Join Date
    Oct 2004
    Location
    London, UK
    Posts
    6,641
    Since im not anymore familiar with freebsd cause is too many years i dont use it, anyone can send me a pm with a command line that will install all pre-requisite? Or any useful hint for have a read-to-install box for DA Staff testing purpose?

    Thanks
    SeLLeRoNe - Andrea Iannucci
    DevOps Engineer - System Administrator
    If you need my support write me an E-Mail to Support@CrazyNetwork.it

  8. #8
    Join Date
    May 2005
    Location
    Montreal, QC, Canada
    Posts
    110
    Quote Originally Posted by DirectAdmin Support View Post
    Hello,

    If anyone has a test box (FreeBSD 9, 64-bit), let me know, and I'll see if the current binaries work on it.
    If they do, then we're only a few steps from beta.
    If they don't, I'll have to setup a new box (many more steps).

    John
    I can have one up next weekend; very little chance of deploying it this week unfortunately. I currently have a 8.x box that will go to 9.0 very soon (my testing machine).

    Quote Originally Posted by SeLLeRoNe View Post
    Since im not anymore familiar with freebsd cause is too many years i dont use it, anyone can send me a pm with a command line that will install all pre-requisite? Or any useful hint for have a read-to-install box for DA Staff testing purpose?

    Thanks
    If you're going the custombuild route entirely, it'll take care of it all for you. You could install www/wget beforehand, but in the name of beta testing, I would follow DirectAdmin's installation instructions to maintain their requirements.


    If you're willing to test & experiment (and don't mind wiping your installation a few times) see how installing lang/perl (5.14?), devel/pcre, devel/libtool, devel/autoconf, devel/automake, devel/autoconf-wrapper, devel/automake-wrapper and print/freetype beforehand affects DirectAdmin. That will be one of my upcoming experiments (and possible HOWTO) for fun. I would love to see a DirectAdmin system based entirely off Ports. I've been dreaming about writing "FreeBuild", "BSDBuild" or "PortsBuild" (alternative to custombuild) to install everything from Ports.
    Last edited by mmx; 01-13-2012 at 07:03 PM.
    FreeBSD <3

  9. #9
    Join Date
    Oct 2004
    Location
    London, UK
    Posts
    6,641
    Yes i did, wget is necessary or fast mirror check will fail, already did some test and build fail somehow... if you wanna try or check the box let me know.

    Ive created this VM just for test it for help DA Staff or someone that wanna test it, no problem on wipe, i just need to restore the snapshot on fresh installation i did, so, if you wanna take a look, just le me know

    Regards
    SeLLeRoNe - Andrea Iannucci
    DevOps Engineer - System Administrator
    If you need my support write me an E-Mail to Support@CrazyNetwork.it

  10. #10
    Join Date
    May 2005
    Location
    Montreal, QC, Canada
    Posts
    110
    Quote Originally Posted by SeLLeRoNe View Post
    Yes i did, wget is necessary or fast mirror check will fail, already did some test and build fail somehow... if you wanna try or check the box let me know.

    Ive created this VM just for test it for help DA Staff or someone that wanna test it, no problem on wipe, i just need to restore the snapshot on fresh installation i did, so, if you wanna take a look, just le me know

    Regards
    Try:

    Code:
    # pkg_add -r compat6x
    # pkg_add -r compat7x
    # pkg_add -r compat8x
    FreeBSD <3

  11. #11
    Join Date
    Oct 2004
    Location
    London, UK
    Posts
    6,641
    All goes on error:

    Code:
    freebsd# pkg_add -r compat6x
    Error: Unable to get ftp://ftp.freebsd.org/pub/FreeBSD/ports/amd64/packages-9.0-release/Latest/compat6x.tbz: File unavailable (e.g., file not found, no access)
    pkg_add: unable to fetch 'ftp://ftp.freebsd.org/pub/FreeBSD/ports/amd64/packages-9.0-release/Latest/compat6x.tbz' by URL
    freebsd# pkg_add -r compat7x
    Error: Unable to get ftp://ftp.freebsd.org/pub/FreeBSD/ports/amd64/packages-9.0-release/Latest/compat7x.tbz: File unavailable (e.g., file not found, no access)
    pkg_add: unable to fetch 'ftp://ftp.freebsd.org/pub/FreeBSD/ports/amd64/packages-9.0-release/Latest/compat7x.tbz' by URL
    freebsd# pkg_add -r compat8x
    Error: Unable to get ftp://ftp.freebsd.org/pub/FreeBSD/ports/amd64/packages-9.0-release/Latest/compat8x.tbz: File unavailable (e.g., file not found, no access)
    pkg_add: unable to fetch 'ftp://ftp.freebsd.org/pub/FreeBSD/ports/amd64/packages-9.0-release/Latest/compat8x.tbz' by URL
    Regards
    SeLLeRoNe - Andrea Iannucci
    DevOps Engineer - System Administrator
    If you need my support write me an E-Mail to Support@CrazyNetwork.it

  12. #12
    Join Date
    May 2005
    Location
    Montreal, QC, Canada
    Posts
    110
    Quote Originally Posted by SeLLeRoNe View Post
    All goes on error:

    Code:
    freebsd# pkg_add -r compat6x
    Error: Unable to get ftp://ftp.freebsd.org/pub/FreeBSD/ports/amd64/packages-9.0-release/Latest/compat6x.tbz: File unavailable (e.g., file not found, no access)
    pkg_add: unable to fetch 'ftp://ftp.freebsd.org/pub/FreeBSD/ports/amd64/packages-9.0-release/Latest/compat6x.tbz' by URL
    freebsd# pkg_add -r compat7x
    Error: Unable to get ftp://ftp.freebsd.org/pub/FreeBSD/ports/amd64/packages-9.0-release/Latest/compat7x.tbz: File unavailable (e.g., file not found, no access)
    pkg_add: unable to fetch 'ftp://ftp.freebsd.org/pub/FreeBSD/ports/amd64/packages-9.0-release/Latest/compat7x.tbz' by URL
    freebsd# pkg_add -r compat8x
    Error: Unable to get ftp://ftp.freebsd.org/pub/FreeBSD/ports/amd64/packages-9.0-release/Latest/compat8x.tbz: File unavailable (e.g., file not found, no access)
    pkg_add: unable to fetch 'ftp://ftp.freebsd.org/pub/FreeBSD/ports/amd64/packages-9.0-release/Latest/compat8x.tbz' by URL
    Regards
    Err, my bad, I forgot to add the architecture suffix. Try:

    Code:
    # pkg_add -r compat6x-amd64
    # pkg_add -r compat7x-amd64
    # pkg_add -r compat8x-amd64
    You can also install them via Ports, check: /usr/ports/misc/compat*
    FreeBSD <3

  13. #13
    Join Date
    Oct 2004
    Location
    London, UK
    Posts
    6,641
    Here ill report error i get during install:

    1st
    Code:
    All Checks have passed, continuing with install...
    Checking quotas...
    ./fstab.sh: /sbin/mount_procfs: not found
    quotaoff: 2 not found in fstab
    SeLLeRoNe - Andrea Iannucci
    DevOps Engineer - System Administrator
    If you need my support write me an E-Mail to Support@CrazyNetwork.it

  14. #14
    Join Date
    Oct 2004
    Location
    London, UK
    Posts
    6,641
    Another error that make build fail:

    Code:
    checking for mysql_close in -lmysqlclient... no
    checking for mysql_error in -lmysqlclient... no
    configure: error: mysql configure failed. Please check config.log for more information.
    
    *** There was an error while trying to configure php. Check the configure/ap2/configure.php5 file
    
    *******************************************
    *******************************************
    
    Cannot find /usr/local/bin/php
    Please recompile php with custombuild, eg:
    cd /usr/local/directadmin/custombuild
    ./build all d
    
    This appears to be a 64-bit system.
    a common cause of http/php compile failures is mentioned here:
    http://help.directadmin.com/item.php?id=213
    SeLLeRoNe - Andrea Iannucci
    DevOps Engineer - System Administrator
    If you need my support write me an E-Mail to Support@CrazyNetwork.it

  15. #15
    Usually means the mysql libs can't be found in /usr/local/mysql/*.
    Ensure the services.tar.gz exists:
    /usr/local/directadmin/scripts/pacakges/services.tar.gz

    which should contain the mysql file... but it will most likely need changes to our scripts/mysql.sh to find the correct version.

    John

  16. #16
    Join Date
    Oct 2004
    Location
    London, UK
    Posts
    6,641
    Ive manually builded mysql using ./build mysql and the php was able to compile, i was using default install way, now ive using the step-by-step selecting mysql 5.1 to be installed via custombuild.

    Ill let you know once compile end with or without errors.

    Regards
    SeLLeRoNe - Andrea Iannucci
    DevOps Engineer - System Administrator
    If you need my support write me an E-Mail to Support@CrazyNetwork.it

  17. #17
    Join Date
    Oct 2004
    Location
    London, UK
    Posts
    6,641
    Installation went like a charm.

    Code:
    Admin user created
    ## INSTALL_COMPLETE
    ## ACCOUNT_INFO
    
    
    The following information has been set:
    
    Admin username:   admin
    Admin password:   ******
    Admin email:      admin@freebsd.crazynetwork.it
    
    
    Server IP: **********
    Server Hostname: freebsd.crazynetwork.it
    
    To login now, follow this link:
    
    http://IP:2222
    
    and enter your Admin username and password when prompted.
    
    You should now visit http://admin.site-helper.com and http://www.directadmin.com/newinstall.html to learn how to get started.
    
    Thank you for using DirectAdmin.  Should you have any questions, don't hesitate to contact us at support@directadmin.com
    
    ## REPORT_END
    Permissions set
    Used to set manually versions, here the options.conf

    Code:
    freebsd# cd /usr/local/directadmin/custombuild
    freebsd# cat options.conf
    #PHP settings. default_php possible values - 4 or 5, php5_ver - 5.2 or 5.3
    default_php=5
    php5_ver=5.2
    php4_cli=no
    php4_cgi=no
    php5_cli=yes
    php5_cgi=no
    ioncube=yes
    zend=yes
    #Possible values - recommended or dist
    php_ini_type=recommended
    
    #Possible values - 5.0, 5.1, 5.5
    mysql=5.1
    mysql_inst=yes
    mysql_backup=yes
    mysql_backup_dir=/usr/local/directadmin/custombuild/mysql_backups
    
    #Possible values - 1.3, 2.0 or 2.2
    apache_ver=2.2
    secure_htaccess=yes
    
    #Web applications
    phpmyadmin=yes
    atmail=no
    squirrelmail=no
    roundcube=yes
    uebimiau=no
    
    #Mail options
    exim=yes
    eximconf=no
    clamav=no
    mailman=no
    spamassassin=no
    mail-header-patch=yes
    dovecot=yes
    
    #Statistics
    awstats=no
    webalizer=yes
    
    #FTP options
    proftpd=no
    pureftpd=no
    
    #Jailed shell (beta)
    jail=no
    
    #Autoconf/automake/libtool options
    autoconf=yes
    automake=yes
    libtool=yes
    curl=yes
    
    #CustomBuild options
    custombuild=1.1
    autover=no
    bold=yes
    clean=yes
    clean_old_tarballs=no
    clean_old_webapps=yes
    downloadserver=files11.directadmin.com
    cleanapache=no
    
    #Cron settings
    cron=no
    email=email@domain.com
    notifications=yes
    da_autoupdate=no
    updates=no
    webapps_updates=yes
    
    #CustomBuild 1.2 settings
    php6_cli=no
    php6_cgi=no
    php_ini=no
    harden-symlinks-patch=no
    Regards
    SeLLeRoNe - Andrea Iannucci
    DevOps Engineer - System Administrator
    If you need my support write me an E-Mail to Support@CrazyNetwork.it

  18. #18
    Join Date
    Oct 2004
    Location
    London, UK
    Posts
    6,641
    Going to retry installation using defaults in custombuild.

    I suppose for any reason mysql 4.1 was falling, ill take a look and let you know once is done

    Regards
    SeLLeRoNe - Andrea Iannucci
    DevOps Engineer - System Administrator
    If you need my support write me an E-Mail to Support@CrazyNetwork.it

  19. #19
    Join Date
    Oct 2004
    Location
    London, UK
    Posts
    6,641
    BTW: Using this file: services_freebsd80_64.tar.gz
    SeLLeRoNe - Andrea Iannucci
    DevOps Engineer - System Administrator
    If you need my support write me an E-Mail to Support@CrazyNetwork.it

  20. #20
    Join Date
    Oct 2004
    Location
    London, UK
    Posts
    6,641
    Dunno if those are errors, but after quota check that fail this appear:

    Code:
    [
    All Checks have passed, continuing with install...
    Checking quotas...
    ./fstab.sh: /sbin/mount_procfs: not found
    quotaoff: 2 not found in fstab
    *** Checking user and group quotas for /dev/ada0p2 (/)
    /: unknown gid: 500
    /: unknown uid: 500
    /: unknown gid: 101
    /: unknown uid: 101
    /: root     fixed (user):       inodes 0 -> 328967      blocks 0 -> 5647968
    /: daemon   fixed (user):       inodes 0 -> 3   blocks 0 -> 24
    /: operator fixed (user):       inodes 0 -> 9   blocks 0 -> 72
    /: man      fixed (user):       inodes 0 -> 128 blocks 0 -> 1024
    /: mail     fixed (user):       inodes 0 -> 11  blocks 0 -> 48
    /: smmsp    fixed (user):       inodes 0 -> 2   blocks 0 -> 16
    /: bind     fixed (user):       inodes 0 -> 9   blocks 0 -> 72
    /: uucp     fixed (user):       inodes 0 -> 1   blocks 0 -> 8
    /: 101      fixed (user):       inodes 0 -> 94  blocks 0 -> 1064
    /: 500      fixed (user):       inodes 0 -> 807 blocks 0 -> 7360
    /: sellerone fixed (user):      inodes 0 -> 10  blocks 0 -> 72
    /: webapps  fixed (user):       inodes 0 -> 1
    /: diradmin fixed (user):       inodes 0 -> 42  blocks 0 -> 36920
    /: nobody   fixed (user):       inodes 0 -> 1   blocks 0 -> 3584
    /: wheel    fixed (group):      inodes 0 -> 329078      blocks 0 -> 5649336
    /: daemon   fixed (group):      inodes 0 -> 10  blocks 0 -> 376
    /: kmem     fixed (group):      inodes 0 -> 3   blocks 0 -> 360
    /: tty      fixed (group):      inodes 0 -> 2   blocks 0 -> 56
    /: operator fixed (group):      inodes 0 -> 13  blocks 0 -> 136
    /: mail     fixed (group):      inodes 0 -> 12  blocks 0 -> 56
    /: games    fixed (group):      inodes 0 -> 1   blocks 0 -> 8
    /: smmsp    fixed (group):      inodes 0 -> 3   blocks 0 -> 1488
    /: bind     fixed (group):      inodes 0 -> 1   blocks 0 -> 8
    /: authpf   fixed (group):      inodes 0 -> 1   blocks 0 -> 48
    /: dialer   fixed (group):      inodes 0 -> 1   blocks 0 -> 8
    /: network  fixed (group):      inodes 0 -> 3   blocks 0 -> 912
    /: audit    fixed (group):      inodes 0 -> 1   blocks 0 -> 8
    /: 101      fixed (group):      inodes 0 -> 94  blocks 0 -> 1064
    /: 500      fixed (group):      inodes 0 -> 807 blocks 0 -> 7360
    /: sellerone fixed (group):     inodes 0 -> 10  blocks 0 -> 72
    /: webapps  fixed (group):      inodes 0 -> 1
    /: diradmin fixed (group):      inodes 0 -> 44  blocks 0 -> 36936
    SeLLeRoNe - Andrea Iannucci
    DevOps Engineer - System Administrator
    If you need my support write me an E-Mail to Support@CrazyNetwork.it

Page 1 of 2 12 LastLast

Similar Threads

  1. FreeBSD Security Advisory FreeBSD-SA-04:05.openssl
    By rhoekman in forum FreeBSD 5.x
    Replies: 3
    Last Post: 10-20-2005, 10:28 PM
  2. Replies: 0
    Last Post: 03-29-2005, 06:52 AM
  3. Replies: 1
    Last Post: 07-10-2004, 12:52 AM
  4. Replies: 0
    Last Post: 07-01-2004, 01:36 AM
  5. FreeBSD Security Advisory FreeBSD-SA-04:05.openssl
    By rhoekman in forum FreeBSD 4.x
    Replies: 0
    Last Post: 03-17-2004, 09:46 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •