Results 1 to 9 of 9

Thread: [WORKAROUND] Successful 8.2-RELEASE installation

  1. #1
    Join Date
    Oct 2010
    Posts
    2

    Cool [WORKAROUND] Successful 8.2-RELEASE installation

    When running setup.sh on fresh 8.2-RELEASE I got the following error:

    Code:
    ./configure:break:15627: not in while, until, select, or repeat loop
    Done. Making pcre-8.12...
    Trying to make PCRE...
    make: no target to make.
    so to fix it after some investigation I did this:
    (you need to run atleast one failed setup.sh before this)
    Code:
    # cd /usr/local/directadmin/pcre-8.12
    # vim configure +15627 [ or use another editor and go to line 15627 ]
    > remove ";break" from line, and save file
    # make distclean
    # cd ..
    # tar cvfx pcre-8.12.tar.gz pcre-8.12/
    # md5 pcre-8.12.tar.gz [ and copy new hash ]
    # vim versions.txt
    > find pcre md5 hash and replace it with updated one, save file
    # chflags schg versions.txt pcre-8.12.tar.gz 
    > run setup.sh again, this time it should work!
    to unlock files run:
    # chflags noschg versions.txt pcre-8.12.tar.gz

    ### to directadmin dev team:
    I am wondering why compile extra pcre version on FreeBSD if the script could just pkg_add -r it?
    Also the script should be smarter and not install 8.0-release packages on 8.2..

  2. #2
    Join Date
    Oct 2010
    Posts
    2

    made a mistake

    that should be:
    Code:
    tar cvfz pcre-8.12.tar.gz pcre-8.12/

  3. #3
    Hello,

    Thanks for the report.

    1) The ./build pcre command seems to work fine on our 8.0 box, so I'm guessing that 8.2 is more strict about certain scripting syntax, hence the configure error is ignored on all versions except for 8.2. Either way, it would seem to be a bug in the pcre configure, as mentioned in the error, a break shouldn't exist if it's not in a loop (or perhaps they made up this rule for 8.2). They may release a fix if they know of the issue, else we may need to change our original source to remove the "break" line if it's an issue for all new 8.2 installs.

    2) As for the reason for the source compile: It's because it's OS independent. The same code works on all of our supported operating systems without the need for OS/version checks. Also, on many older boxes, the pkg_add -r command doesn't work forever (once support is dropped FreeBSD). But with our own system, it works forever, all OS's, all versions, regardless of package system and EOL dates.

    John

  4. #4
    Join Date
    Sep 2012
    Posts
    3

    fourth

    hi
    tnk

    on freebsd 8.3 i can not find cd /usr/local/directadmin/pcre-8.12
    but i think is here : /usr/local/directadmin/custombuild/pcre-8.20

    on configure file , line +15627 no see i ";break"

    make distclean is not work
    vps1# make distclean
    make: don't know how to make distclean. Stop


    not work : tar cvfx pcre-8.12.tar.gz pcre-8.12/ :
    vps1# tar cvfx pcre-8.12.tar.gz pcre-8.12/
    tar: Can't specify both -x and -c

    but tar -xv pcre-8.12.tar.gz pcre-8.12/ :
    tar: Error opening archive: Failed to open '/dev/sa0'

    !!!

    i see pcre-8.20.tar.gz version on my dir

    i runing setup.sh again and see error again

    help me

    FreeBSD vps1 8.3-RELEASE-p3 FreeBSD 8.3-RELEASE-p3 #0: Tue Jun 12 00:39:29 UTC 2012 root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64

  5. #5
    Join Date
    Apr 2005
    Location
    GMT +7.00
    Posts
    11,023
    Code:
    cd /usr/local/directadmin/custombuild
     ./build pcre
    ?
    With regards, Alex.

    Professional Server Management for web hosting companies and individuals
    Hourly Support, Disaster Recovery, Server Hardening, Monthly Subscription
    Directadmin installation and optimization

    Click here if you need a Linux Admin

  6. #6
    Join Date
    Sep 2012
    Posts
    3
    Quote Originally Posted by zEitEr View Post
    Code:
    cd /usr/local/directadmin/custombuild
     ./build pcre
    ?
    Code:
    vps1# cd /usr/local/directadmin/custombuild
    vps1# ./build pcre
    mail-header-patch=yes is set in the options.conf, but is not required with this php version.
    To enable the X-Mail header, set mail.add_x_header to 1 in your php.ini
    File already exists:    pcre-8.20.tar.gz
    MD5 Checksum on pcre-8.20.tar.gz passed.
    Found /usr/local/directadmin/custombuild/pcre-8.20.tar.gz
    Extracting ...
    Done.
    Configuring pcre-8.20...
    checking for a BSD-compatible install... /usr/bin/install -c
    checking whether build environment is sane... yes
    checking for a thread-safe mkdir -p... ./install-sh -c -d
    checking for gawk... no
    checking for mawk... no
    checking for nawk... nawk
    checking whether make sets $(MAKE)... yes
    checking for gcc... gcc
    checking whether the C compiler works... yes
    checking for C compiler default output file name... a.out
    checking for suffix of executables...
    checking whether we are cross compiling... no
    checking for suffix of object files... o
    checking whether we are using the GNU C compiler... yes
    checking whether gcc accepts -g... yes
    checking for gcc option to accept ISO C89... none needed
    checking for style of include used by make... GNU
    checking dependency style of gcc... gcc3
    checking for g++... g++
    checking whether we are using the GNU C++ compiler... yes
    checking whether g++ accepts -g... yes
    checking dependency style of g++... gcc3
    checking how to run the C preprocessor... gcc -E
    checking for grep that handles long lines and -e... /usr/bin/grep
    checking for egrep... /usr/bin/grep -E
    checking for ANSI C header files... yes
    checking for sys/types.h... yes
    checking for sys/stat.h... yes
    checking for stdlib.h... yes
    checking for string.h... yes
    checking for memory.h... yes
    checking for strings.h... yes
    checking for inttypes.h... yes
    checking for stdint.h... yes
    checking for unistd.h... yes
    checking for int64_t... yes
    checking build system type... x86_64-unknown-freebsd8.3
    checking host system type... x86_64-unknown-freebsd8.3
    checking how to print strings... print -r
    checking for a sed that does not truncate output... /usr/bin/sed
    checking for fgrep... /usr/bin/grep -F
    checking for ld used by gcc... /usr/bin/ld
    checking if the linker (/usr/bin/ld) is GNU ld... yes
    checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
    checking the name lister (/usr/bin/nm -B) interface... BSD nm
    checking whether ln -s works... yes
    checking the maximum length of command line arguments... 196608
    checking whether the shell understands some XSI constructs... yes
    checking whether the shell understands "+="... yes
    checking how to convert x86_64-unknown-freebsd8.3 file names to x86_64-unknown-freebsd8.3 format... func_convert_file_noop
    checking how to convert x86_64-unknown-freebsd8.3 file names to toolchain format... func_convert_file_noop
    checking for /usr/bin/ld option to reload object files... -r
    checking for objdump... objdump
    checking how to recognize dependent libraries... pass_all
    checking for dlltool... dlltool
    checking how to associate runtime and link libraries... print -r --
    checking for ar... ar
    checking for archiver @FILE support... no
    checking for strip... strip
    checking for ranlib... ranlib
    checking command to parse /usr/bin/nm -B output from gcc object... ok
    checking for sysroot... no
    checking for mt... mt
    checking if mt is a manifest tool... no
    checking for dlfcn.h... yes
    checking for objdir... .libs
    checking if gcc supports -fno-rtti -fno-exceptions... no
    checking for gcc option to produce PIC... -fPIC -DPIC
    checking if gcc PIC flag -fPIC -DPIC works... yes
    checking if gcc static flag -static works... yes
    checking if gcc supports -c -o file.o... yes
    checking if gcc supports -c -o file.o... (cached) yes
    checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
    checking whether -lc should be explicitly linked in... no
    checking dynamic linker characteristics... freebsd8.3 ld.so
    checking how to hardcode library paths into programs... immediate
    checking whether stripping libraries is possible... yes
    checking if libtool supports shared libraries... yes
    checking whether to build shared libraries... yes
    checking whether to build static libraries... yes
    checking how to run the C++ preprocessor... g++ -E
    checking for ld used by g++... /usr/bin/ld
    checking if the linker (/usr/bin/ld) is GNU ld... yes
    checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
    checking for g++ option to produce PIC... -fPIC -DPIC
    checking if g++ PIC flag -fPIC -DPIC works... yes
    checking if g++ static flag -static works... yes
    checking if g++ supports -c -o file.o... yes
    checking if g++ supports -c -o file.o... (cached) yes
    checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
    checking dynamic linker characteristics... freebsd8.3 ld.so
    checking how to hardcode library paths into programs... immediate
    checking whether ln -s works... yes
    checking for ANSI C header files... (cached) yes
    checking limits.h usability... yes
    checking limits.h presence... yes
    checking for limits.h... yes
    checking for sys/types.h... (cached) yes
    checking for sys/stat.h... (cached) yes
    checking dirent.h usability... yes
    checking dirent.h presence... yes
    checking for dirent.h... yes
    checking windows.h usability... no
    checking windows.h presence... no
    checking for windows.h... no
    checking for alias support in the linker... no
    checking for alias support in the linker... no
    checking string usability... yes
    checking string presence... yes
    checking for string... yes
    checking bits/type_traits.h usability... no
    checking bits/type_traits.h presence... no
    checking for bits/type_traits.h... no
    checking type_traits.h usability... no
    checking type_traits.h presence... no
    checking for type_traits.h... no
    checking for strtoq... yes
    checking for long long... yes
    checking for unsigned long long... yes
    checking for an ANSI C-conforming const... yes
    checking for size_t... yes
    checking for bcopy... yes
    checking for memmove... yes
    checking for strerror... yes
    checking zlib.h usability... yes
    checking zlib.h presence... yes
    checking for zlib.h... yes
    checking for gzopen in -lz... yes
    checking bzlib.h usability... yes
    checking bzlib.h presence... yes
    checking for bzlib.h... yes
    checking for libbz2... yes
    ./configure:break:16521: not in while, until, select, or repeat loop
    Done. Making pcre-8.20...
    Trying to make PCRE...
    make: no target to make.
    
    *** The make has failed, would you like to try to make again? (y,n):
    y
    
    Trying to make PCRE...
    make: no target to make.
    
    *** The make has failed, would you like to try to make again? (y,n):

  7. #7
    Join Date
    Apr 2005
    Location
    GMT +7.00
    Posts
    11,023
    What if you try to install pcre from FreeBSd ports?

    Code:
    cd /usr/ports/devel/pcre
    make clean && make install all
    and then try to install Directadmin once more.

    Note, if you might want somebody to do it for you, please do not hesitate, as there are some guys (including me) here who are ready to give the best commerce service to solve your issue.
    With regards, Alex.

    Professional Server Management for web hosting companies and individuals
    Hourly Support, Disaster Recovery, Server Hardening, Monthly Subscription
    Directadmin installation and optimization

    Click here if you need a Linux Admin

  8. #8
    Join Date
    Sep 2012
    Posts
    3
    not work !
    ./configure:break:16521: not in while, until, select, or repeat loop
    Done. Making pcre-8.20...
    Trying to make PCRE...
    make: no target to make.

  9. #9
    Join Date
    Apr 2005
    Location
    GMT +7.00
    Posts
    11,023
    OK, I guess I need to look at it myself.
    With regards, Alex.

    Professional Server Management for web hosting companies and individuals
    Hourly Support, Disaster Recovery, Server Hardening, Monthly Subscription
    Directadmin installation and optimization

    Click here if you need a Linux Admin

Similar Threads

  1. successful upgrade to 9.1 release from 7.2
    By whowasi in forum FreeBSD 8.x 64-bit
    Replies: 3
    Last Post: 01-27-2013, 02:21 AM
  2. error 404 on port 2222 after a successful installation
    By tincboy in forum Installation / System Requirements
    Replies: 1
    Last Post: 08-14-2009, 04:56 AM
  3. port 25 blocked workaround
    By fastsvc in forum CentOS
    Replies: 2
    Last Post: 04-22-2009, 07:06 AM
  4. Any Workaround for Installing in LAN?
    By playah12 in forum Installation / System Requirements
    Replies: 6
    Last Post: 02-09-2009, 11:27 AM
  5. Cannot Start DA after install successful
    By Chickenwing in forum Installation / System Requirements
    Replies: 3
    Last Post: 03-27-2008, 06:46 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •