CentOS 5.2 64Bit - YUM UPDATE Packages

Hi,
i tried now to look if i found some updates on my system with the comand "yum update".

This is the result :

=============================================================================
Package Arch Version Repository Size
=============================================================================
Updating:
ORBit2 i386 2.14.3-5.el5 base 252 k
ORBit2 x86_64 2.14.3-5.el5 base 263 k
SysVinit x86_64 2.86-15.el5 base 117 k
acpid x86_64 1.0.4-7.el5 base 23 k
alsa-lib x86_64 1.0.17-1.el5 base 414 k
audit x86_64 1.7.7-6.el5 base 362 k
audit-libs i386 1.7.7-6.el5 base 77 k
audit-libs x86_64 1.7.7-6.el5 base 80 k
audit-libs-python x86_64 1.7.7-6.el5 base 78 k
avahi i386 0.6.16-1.el5_2.1 updates 250 k
avahi x86_64 0.6.16-1.el5_2.1 updates 255 k
avahi-glib i386 0.6.16-1.el5_2.1 updates 14 k
avahi-glib x86_64 0.6.16-1.el5_2.1 updates 14 k
bash x86_64 3.2-24.el5 base 1.9 M
bind x86_64 30:9.3.4-10.P1.el5 base 961 k
bind-libs x86_64 30:9.3.4-10.P1.el5 base 869 k
bind-utils x86_64 30:9.3.4-10.P1.el5 base 173 k
binutils x86_64 2.17.50.0.6-9.el5 base 2.9 M
centos-release x86_64 10:5-3.el5.centos.1 base 19 k
centos-release-notes x86_64 5.3-3 base 39 k
clamav x86_64 0.95-1.el5.rf rpmforge 2.7 M
clamav-db x86_64 0.95-1.el5.rf rpmforge 20 M
clamd x86_64 0.95-1.el5.rf rpmforge 235 k
coreutils x86_64 5.97-19.el5 base 3.5 M
cpp x86_64 4.1.2-44.el5 base 3.0 M
cryptsetup-luks i386 1.0.3-4.el5 base 623 k
cryptsetup-luks x86_64 1.0.3-4.el5 base 627 k
cups-libs x86_64 1:1.3.7-8.el5 base 189 k
cups-libs i386 1:1.3.7-8.el5 base 193 k
curl x86_64 7.15.5-2.1.el5_3.4 updates 229 k
dbus x86_64 1.1.2-12.el5 base 233 k
dbus i386 1.1.2-12.el5 base 234 k
dbus-glib x86_64 0.73-8.el5 base 162 k
dbus-glib i386 0.73-8.el5 base 160 k
device-mapper i386 1.02.28-2.el5 base 656 k
device-mapper x86_64 1.02.28-2.el5 base 686 k
device-mapper-event x86_64 1.02.28-2.el5 base 20 k
device-mapper-multipath x86_64 0.4.7-23.el5_3.1 updates 2.4 M
dhclient x86_64 12:3.0.5-18.el5 base 281 k
dmraid x86_64 1.0.0.rc13-33.el5 base 707 k
dosfstools x86_64 2.11-7.el5 base 69 k
e2fsprogs x86_64 1.39-20.el5 base 987 k
e2fsprogs-devel x86_64 1.39-20.el5 base 636 k
e2fsprogs-libs i386 1.39-20.el5 base 118 k
e2fsprogs-libs x86_64 1.39-20.el5 base 117 k
elfutils-libelf x86_64 0.137-3.el5 base 53 k
ethtool x86_64 6-2.el5 base 67 k
file x86_64 4.17-15 base 323 k
filesystem x86_64 2.4.0-2.el5.centos base 117 k
findutils x86_64 1:4.2.27-5.el5 base 294 k
ftp x86_64 0.17-35.el5 base 57 k
gcc x86_64 4.1.2-44.el5 base 5.3 M
gcc-c++ x86_64 4.1.2-44.el5 base 3.8 M
gd x86_64 2.0.33-9.4.el5_1.1 base 156 k
ghostscript i386 8.15.2-9.4.el5_3.4 updates 5.9 M
ghostscript x86_64 8.15.2-9.4.el5_3.4 updates 5.9 M
glib2 i386 2.12.3-4.el5_3.1 updates 674 k
glib2 x86_64 2.12.3-4.el5_3.1 updates 693 k
glibc i686 2.5-34 base 5.2 M
glibc x86_64 2.5-34 base 4.7 M
glibc-common x86_64 2.5-34 base 16 M
glibc-devel x86_64 2.5-34 base 2.4 M
glibc-headers x86_64 2.5-34 base 589 k
gnupg x86_64 1.4.5-14 base 1.8 M
hal i386 0.5.8.1-38.el5 base 381 k
hal x86_64 0.5.8.1-38.el5 base 368 k
hwdata noarch 0.213.11-1.el5 base 357 k
initscripts x86_64 8.45.25-1.el5.centos base 1.6 M
iproute x86_64 2.6.18-9.el5 base 822 k
ipsec-tools x86_64 0.6.5-13.el5 base 398 k
iputils x86_64 20020927-45.el5 base 131 k
kbd x86_64 1.12-21.el5 base 1.3 M
kpartx x86_64 0.4.7-23.el5_3.1 updates 422 k
krb5-devel x86_64 1.6.1-31.el5 base 1.9 M
krb5-libs x86_64 1.6.1-31.el5 base 670 k
krb5-libs i386 1.6.1-31.el5 base 660 k
ksh x86_64 20080202-2.el5 base 756 k
kudzu x86_64 1.2.57.1.21-1.el5.centos base 217 k
lcms i386 1.18-0.1.beta1.el5_3.2 updates 176 k
lcms x86_64 1.18-0.1.beta1.el5_3.2 updates 177 k
libgcc x86_64 4.1.2-44.el5 base 96 k
libgcc i386 4.1.2-44.el5 base 94 k
libgcrypt i386 1.2.4-1.el5 base 175 k
libgcrypt x86_64 1.2.4-1.el5 base 162 k
libgomp x86_64 4.3.2-7.el5 base 66 k
libhugetlbfs x86_64 1.3-3.el5 base 37 k
libhugetlbfs i386 1.3-3.el5 base 35 k
libpcap x86_64 14:0.9.4-14.el5 base 108 k
libpng i386 2:1.2.10-7.1.el5_3.2 updates 241 k
libpng x86_64 2:1.2.10-7.1.el5_3.2 updates 234 k
libselinux i386 1.33.4-5.1.el5 base 76 k
libselinux x86_64 1.33.4-5.1.el5 base 77 k
libselinux-devel x86_64 1.33.4-5.1.el5 base 149 k
libselinux-python x86_64 1.33.4-5.1.el5 base 59 k
libstdc++ x86_64 4.1.2-44.el5 base 353 k
libstdc++ i386 4.1.2-44.el5 base 363 k
libstdc++-devel x86_64 4.1.2-44.el5 base 2.8 M
libutempter x86_64 1.1.4-4.el5 base 22 k
libvolume_id i386 095-14.19.el5 base 40 k
libvolume_id x86_64 095-14.19.el5 base 39 k
logrotate x86_64 3.7.4-9 base 40 k
lvm2 x86_64 2.02.40-6.el5 base 2.5 M
m2crypto x86_64 0.16-6.el5.3 base 493 k
man-pages noarch 2.39-12.el5 base 4.1 M
mcstrans x86_64 0.2.11-3.el5 base 17 k
mlocate x86_64 0.15-1.el5.1 base 48 k
module-init-tools x86_64 3.3-0.pre3.1.42.el5 base 436 k
newt x86_64 0.52.2-12.el5 base 109 k
nss x86_64 3.12.2.0-4.el5.centos updates 1.1 M
nss i386 3.12.2.0-4.el5.centos updates 1.1 M
nss-tools x86_64 3.12.2.0-4.el5.centos updates 1.3 M
ntp x86_64 4.2.2p1-9.el5.centos base 1.3 M
openldap x86_64 2.3.43-3.el5 base 301 k
openldap i386 2.3.43-3.el5 base 293 k
openssh x86_64 4.3p2-29.el5 base 285 k
openssh-clients x86_64 4.3p2-29.el5 base 445 k
openssh-server x86_64 4.3p2-29.el5 base 261 k
openssl i686 0.9.8e-7.el5 base 1.4 M
openssl x86_64 0.9.8e-7.el5 base 1.4 M
openssl-devel x86_64 0.9.8e-7.el5 base 1.8 M
pam i386 0.99.6.2-4.el5 base 965 k
pam x86_64 0.99.6.2-4.el5 base 964 k
pam-devel i386 0.99.6.2-4.el5 base 186 k
pam-devel x86_64 0.99.6.2-4.el5 base 186 k
parted x86_64 1.8.1-23.el5 base 520 k
parted i386 1.8.1-23.el5 base 541 k
patch x86_64 2.5.4-29.2.3.el5 base 63 k
perl x86_64 4:5.8.8-18.el5_3.1 updates 12 M
pkinit-nss x86_64 0.7.6-1.el5 base 189 k
pm-utils x86_64 0.99.3-10.el5.centos base 134 k
policycoreutils x86_64 1.33.12-14.2.el5 base 633 k
popt i386 1.10.2.3-9.el5 base 73 k
popt x86_64 1.10.2.3-9.el5 base 75 k
prelink x86_64 0.4.0-2.el5 base 997 k
procps x86_64 3.2.7-11.1.el5 base 212 k
proftpd x86_64 1.3.2-1.el5.rf rpmforge 2.0 M
psacct x86_64 6.3.2-44.el5 base 59 k
python x86_64 2.4.3-24.el5 base 5.9 M
python-urlgrabber noarch 3.1.0-5.el5 base 131 k
quota x86_64 1:3.13-1.2.5.el5 base 339 k
redhat-menus noarch 6.7.8-3.el5 base 199 k
redhat-rpm-config noarch 8.0.45-29.el5 base 54 k
rpm x86_64 4.4.2.3-9.el5 base 1.2 M
rpm-libs x86_64 4.4.2.3-9.el5 base 927 k
rpm-python x86_64 4.4.2.3-9.el5 base 60 k
selinux-policy noarch 2.4.6-203.el5 base 382 k
selinux-policy-targeted noarch 2.4.6-203.el5 base 1.1 M
setup noarch 2.5.58-4.el5 base 124 k
shadow-utils x86_64 2:4.0.17-14.el5 base 1.0 M
smartmontools x86_64 1:5.38-2.el5 base 348 k
sos noarch 1.7-9.16.el5 base 116 k
stunnel x86_64 4.15-2.el5.1 base 112 k
sudo x86_64 1.6.9p17-3.el5_3.1 updates 226 k
tcp_wrappers i386 7.6-40.6.el5 base 108 k
tcp_wrappers x86_64 7.6-40.6.el5 base 111 k
tcpdump x86_64 14:3.9.4-14.el5 base 459 k
tcsh x86_64 6.14-14.el5 base 475 k
tmpwatch x86_64 2.9.7-1.1.el5.2 base 19 k
traceroute x86_64 3:2.0.1-5.el5 base 41 k
udev x86_64 095-14.19.el5 base 2.4 M
unzip x86_64 5.52-3.el5 base 165 k
usermode x86_64 1.88-3.el5.2 base 155 k
util-linux x86_64 2.13-0.50.el5 base 1.8 M
vixie-cron x86_64 4:4.1-76.el5 base 80 k
yum noarch 3.2.19-18.el5.centos base 917 k
yum-fastestmirror noarch 1.1.16-13.el5.centos base 18 k
yum-priorities noarch 1.1.16-13.el5.centos base 14 k
zip x86_64 2.31-2.el5 base 136 k
Installing for dependencies:
dbus-libs x86_64 1.1.2-12.el5 base 122 k
dbus-libs i386 1.1.2-12.el5 base 123 k
libselinux-utils x86_64 1.33.4-5.1.el5 base 55 k


I can or not ? I'm fear to make bad somethings !


Thank you very much

Those are all for the CentOS 5.3 update.

Orien said:

Those are all for the CentOS 5.3 update.

Click to expand...

Yes, i can upgrade without problems or my DirectAdmin will stop after it ?

Yes, you can upgrade

smtalk said:

Yes, you can upgrade

Click to expand...

I had make it and all looking good, thanks !!

What i do with this files ?

/etc/freshclam.conf.rpmnew
/etc/issue.rpmnew
/etc/krb5.conf.rpmnew
/etc/ld.so.conf.rpmnew
/etc/libaudit.conf.rpmnew
/etc/nsswitch.conf.rpmnew
/etc/smartd.conf.rpmnew
/etc/yum.conf.rpmnew
/etc/pam.d/config-util.rpmnew
/etc/pam.d/other.rpmnew
/etc/pam.d/system-auth.rpmnew
/etc/pki/nssdb/cert8.db.rpmnew
/etc/pki/nssdb/key3.db.rpmnew
/etc/pki/tls/openssl.cnf.rpmnew
/etc/pki/tls/certs/ca-bundle.crt.rpmnew
/etc/security/access.conf.rpmnew
/etc/security/chroot.conf.rpmnew
/etc/security/console.handlers.rpmnew
/etc/security/group.conf.rpmnew
/etc/security/limits.conf.rpmnew
/etc/security/namespace.conf.rpmnew
/etc/security/namespace.init.rpmnew
/etc/security/opasswd.rpmnew
/etc/security/pam_env.conf.rpmnew
/etc/security/time.conf.rpmnew
/etc/yum.repos.d/CentOS-Base.repo.rpmnew


Thanks

What you're supposed to do is check these files against the ones already on your system (without the .rpmnew extension). Ideally you should copy the new ones over the old ones to get the features in the new RPMs, but you need to make sure you preserve any changes you may have made to the original files or you could lose functinality.

I don't know which of these you may be using, so I can't tell you more specifically.

You probably do want to copy over the files for yum, but be sure to preserve your custom excludes line in your current yum.conf to the new one, or you may break your server the next time yum runs.

Jeff

Hi

Which packages we shouldn't update for not conflict with direct admin?

Thanks

Seach these forums for the yum.conf line beginning with exclude

Jeff

Currently i have :
exclude=apache* httpd* mod_* mysql* MySQL* da_* *ftp* exim* sendmail* php* bind-chroot*

in yum.conf. Are these correct?

I run yum update and i saw that yum package will be update too. Is this a problem?

I've posted my exclude line many times on this forum; I don't see any reason to do it again.

However, here it is:
Note that many of these are unnecessary (unless as I do you run yum update before you install DirectAdmin, as yum won't update packages that aren't already installed. Also, it's a good idea to exclude package you never want even if they're not already installed, because that keeps you from installing them accidentally.

You should definitely update yum itself.

Note that I do not exclude the kernel; many people do. I know my systems are RedHat certified, and I know official kernels will work. Your experience may differ. Updating kernels is important, but you may want to update them manually, when you're either at your datacenter or can get there quickly to solve problems if they don't work.

You can also write custom code to automatically reset grup to restart from an earlier kernel if the new one won't boot, but that's well beyond the scope of the DirectAdmin forums.

Jeff

For CentOS 5.2 32Bit - YUM UPDATE Packages seen have many problem !

Such as?

Jeff

get below error : (From CentOS 5.2 32Bit )

If it weren't a live server I'd recommend removing everything related to MySQL and then reinstalling it all.

Jeff

Thanks Jeff , Of cos which is a live server, anyone have safe way to fix that ?

BR.,

Dauser

Dauser2007 said:

get below error : (From CentOS 5.2 32Bit )

Code:

--> Finished Dependency Resolution
Error: Missing Dependency: libmysqlclient.so.15 is needed by package perl-DBD-MySQL
Error: Missing Dependency: libmysqlclient.so.15(libmysqlclient_15) is needed by package perl-DBD-MySQL

Code:

[root@host ~]# yum install perl-DBD-MySQL.i386
Loading "fastestmirror" plugin
Loading mirror speeds from cached hostfile
 * base: centos.yubis.org
 * updates: centos.ustc.edu.cn
 * addons: centos.yubis.org
 * extras: centos.ustc.edu.cn
Excluding Packages in global exclude list
Finished
Setting up Install Process
Parsing package install arguments
Resolving Dependencies
--> Running transaction check
---> Package perl-DBD-MySQL.i386 0:3.0007-2.el5 set to be updated
--> Processing Dependency: libmysqlclient.so.15 for package: perl-DBD-MySQL
--> Processing Dependency: libmysqlclient.so.15(libmysqlclient_15) for package: perl-DBD-MySQL
--> Finished Dependency Resolution
Error: Missing Dependency: libmysqlclient.so.15 is needed by package perl-DBD-MySQL
Error: Missing Dependency: libmysqlclient.so.15(libmysqlclient_15) is needed by package perl-DBD-MySQL

Code:

rpm -qa | grep -i mysql
MySQL-client-5.1.32-0.glibc23
MySQL-server-5.1.32-0.glibc23
MySQL-shared-5.1.32-0.glibc23
perl-DBD-MySQL-3.0007-1.fc6
MySQL-devel-5.1.32-0.glibc23

Click to expand...

http://tinyurl.com/ctfe45

If you got a problem installing perl-DBD-MySQL with cpan shell.

it might because installer needs root password on mysql to be blank.
didnt check if you could add --testuser parameters in the cpan shell.

What i did, was installing manually, download source etc..

And used da_admin account so the tests was ok.

perl Makefile.PL --testuser=da_admin --testpassword=xxxx