Okay, I assume this issue is because of parsing problem for finding the network device for FreeBSD 5.1:
Everything in <alligator brackets> have been edited out for security purposes.
Here's the initial installation prompts:
Not sure if this was supposed to do this, but it seems get unnecessary information from the network configurations file.
As a result, after everything has been successfully compiled, the installer says the IP address is #ifconfig_rl0="DHCP" and points me to http://#ifconfig_rl0="DHCP":2222 for logging into DirectAdmin.
Also, I've tried logging in to the http://<main ip address>:2222 and it doesn't seem like DirectAdmin is running at all.
Everything in <alligator brackets> have been edited out for security purposes.
Here's the initial installation prompts:
Enter your hostname : <hostname>
Client ID: <XXX>
License ID: <XXX>
Hostname: <hostname>
Is this correct? (y,n) : y
Is rl0
rl0 your network adaptor with the license IP? (y,n) : n
Enter the name of the ethernet device you wish to use : rl0
Is #ifconfig_rl0="DHCP"
11.111.111.111 the IP in your license? (y,n) : 11.111.111.111
DirectAdmin will now be install on: FreeBSD 5.1
Is this correct? (must match license) (y,n) : y
Not sure if this was supposed to do this, but it seems get unnecessary information from the network configurations file.
The following information has been set:
Admin username: admin
Admin password: <password>
Admin email: admin@<hostname>
Server IP: #ifconfig_rl0="DHCP"
Server Hostname: <hostname>
To login now, follow this link:
http://#ifconfig_rl0="DHCP":2222
As a result, after everything has been successfully compiled, the installer says the IP address is #ifconfig_rl0="DHCP" and points me to http://#ifconfig_rl0="DHCP":2222 for logging into DirectAdmin.
Also, I've tried logging in to the http://<main ip address>:2222 and it doesn't seem like DirectAdmin is running at all.