AMD Processor model unknown

[Suurbier]

@attachment.

 

[nobaloney]

What's the output of:

$ cat /proc/cpuinfo

Jeff

 

[Suurbier]

[root@srv ~]# cat /proc/cpuinfo
processor       : 0
vendor_id       : AuthenticAMD
cpu family      : 15
model           : 107
model name      : AMD Processor model unknown
stepping        : 2
cpu MHz         : 2210.110
cache size      : 512 KB
physical id     : 0
siblings        : 2
core id         : 0
cpu cores       : 2
apicid          : 0
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 1
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow nonstop_tsc pni cx16 lahf_lm cmp_legacy svm extapic cr8legacy 3dnowprefetch ts fid vid ttp tm stc 100mhzsteps
bogomips        : 4420.22

processor       : 1
vendor_id       : AuthenticAMD
cpu family      : 15
model           : 107
model name      : AMD Processor model unknown
stepping        : 2
cpu MHz         : 2210.110
cache size      : 512 KB
physical id     : 0
siblings        : 2
core id         : 1
cpu cores       : 2
apicid          : 1
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 1
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow nonstop_tsc pni cx16 lahf_lm cmp_legacy svm extapic cr8legacy 3dnowprefetch ts fid vid ttp tm stc 100mhzsteps
bogomips        : 4420.21

 

[nobaloney]

Your OS Distribution doesn't know the AMD processor model. Note this command says the same. DirectAdmin is asking your OS Distribution what your processor is, and the OS is telling DirectAdmin it doesn't know. So DirectAdmin has nothing else it can tell you.

Either the Processor doesn't have a model number listed in the location it should be, or the BIOS in your system has a problem deciphering it. Nothing to do with DirectAdmin.

Jeff

 

[Suurbier]

How can i fix this?

 

[SeLLeRoNe]

Maybe a kernel update, but not quite sure about that work (depend of newer kernel version if "know" that cpu)

 

[nobaloney]

It's likely your processor doesn't have the code to be read. You can check with support at AMD to find out. Why is it so important?

Jeff