install perl DBD?
- Thread starter aboyz
- Start date
i'mg etting this erorr.
cpan> install DBD::mysql
Running install for module DBD::mysql
Running make for R/RU/RUDY/DBD-mysql-2.9004.tar.gz
LWP not available
CPAN: Net::FTP loaded ok
Fetching with Net::FTP:
ftp://ftp.perl.org/pub/CPAN/authors...l-2.9004.tar.gz
CPAN: Digest::MD5 loaded ok
LWP not available
Fetching with Net::FTP:
ftp://ftp.perl.org/pub/CPAN/authors.../RUDY/CHECKSUMS
Checksum for /root/.cpan/sources/authors/id/R/RU/RUDY/DBD-mysql-2.9004.tar.gz ok
Scanning cache /root/.cpan/build for sizes
DBD-mysql-2.9004/
DBD-mysql-2.9004/t/
DBD-mysql-2.9004/t/mysql2.t
DBD-mysql-2.9004/t/akmisc.t
DBD-mysql-2.9004/t/60leaks.t
DBD-mysql-2.9004/t/10dsnlist.t
DBD-mysql-2.9004/t/ak-dbd.t
DBD-mysql-2.9004/t/50chopblanks.t
DBD-mysql-2.9004/t/mysql.t
DBD-mysql-2.9004/t/lib.pl
DBD-mysql-2.9004/t/40blobs.t
DBD-mysql-2.9004/t/40nulls.t
DBD-mysql-2.9004/t/insertid.t
DBD-mysql-2.9004/t/40listfields.t
DBD-mysql-2.9004/t/40bindparam.t
DBD-mysql-2.9004/t/mysql.dbtest
DBD-mysql-2.9004/t/dbdadmin.t
DBD-mysql-2.9004/t/20createdrop.t
DBD-mysql-2.9004/t/00base.t
DBD-mysql-2.9004/t/30insertfetch.t
DBD-mysql-2.9004/t/40numrows.t
DBD-mysql-2.9004/t/50commit.t
DBD-mysql-2.9004/t/mysql.mtest
DBD-mysql-2.9004/MANIFEST
DBD-mysql-2.9004/myld
DBD-mysql-2.9004/dbdimp.c
DBD-mysql-2.9004/lib/
DBD-mysql-2.9004/lib/DBD/
DBD-mysql-2.9004/lib/DBD/mysql/
DBD-mysql-2.9004/lib/DBD/mysql/GetInfo.pm
DBD-mysql-2.9004/lib/DBD/mysql/INSTALL.pod
DBD-mysql-2.9004/lib/DBD/mysql.pm
DBD-mysql-2.9004/lib/Mysql/
DBD-mysql-2.9004/lib/Mysql/Statement.pm
DBD-mysql-2.9004/lib/Bundle/
DBD-mysql-2.9004/lib/Bundle/DBD/
DBD-mysql-2.9004/lib/Bundle/DBD/mysql.pm
DBD-mysql-2.9004/lib/Mysql.pm
DBD-mysql-2.9004/dbdimp.h
DBD-mysql-2.9004/mysql.xs
DBD-mysql-2.9004/MANIFEST.SKIP
DBD-mysql-2.9004/README
DBD-mysql-2.9004/INSTALL.html
DBD-mysql-2.9004/META.yml
DBD-mysql-2.9004/Makefile.PL
DBD-mysql-2.9004/ChangeLog
DBD-mysql-2.9004/constants.h
DBD-mysql-2.9004/TODO
CPAN.pm: Going to build R/RU/RUDY/DBD-mysql-2.9004.tar.gz
I will use the following settings for compiling and testing:
cflags (mysql_config) = -I/usr/include/mysql -mcpu=i486 -fno-strength-reduce
libs (mysql_config) = -L/usr/lib/mysql -lmysqlclient -lz -lcrypt -lnsl -lm -lc -lnss_files -lnss_dns -lresolv -lc -lnss_files -lnss_dns -lresolv
nocatchstderr (default ) = 0
nofoundrows (default ) = 0
ssl (guessed ) = 0
testdb (default ) = test
testhost (default ) =
testpassword (default ) =
testuser (default ) =
To change these settings, see 'perl Makefile.PL --help' and
'perldoc INSTALL'.
Checking if your kit is complete...
Looks good
Multiple copies of Driver.xst found in: /usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/DBI /usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi/auto/DBI at Makefile.PL line 295
Using DBI 1.38 installed in /usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/DBI
Writing Makefile for DBD::mysql
cp lib/DBD/mysql/GetInfo.pm blib/lib/DBD/mysql/GetInfo.pm
cp lib/DBD/mysql.pm blib/lib/DBD/mysql.pm
cp lib/DBD/mysql/INSTALL.pod blib/lib/DBD/mysql/INSTALL.pod
cp lib/Mysql.pm blib/lib/Mysql.pm
cp lib/Mysql/Statement.pm blib/lib/Mysql/Statement.pm
cp lib/Bundle/DBD/mysql.pm blib/lib/Bundle/DBD/mysql.pm
gcc -c -I/usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/DBI -I/usr/include/mysql -mcpu=i486 -fno-strength-reduce -D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -march=i386 -mcpu=i686 -g -DVERSION=\"2.9004\" -DXS_VERSION=\"2.9004\" -fPIC "-I/usr/lib/perl5/5.8.0/i386-linux-thread-multi/CORE" dbdimp.c
/usr/bin/perl -p -e "s/~DRIVER~/mysql/g" /usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/DBI/Driver.xst > mysql.xsi
/usr/bin/perl /usr/lib/perl5/5.8.0/ExtUtils/xsubpp -typemap /usr/lib/perl5/5.8.0/ExtUtils/typemap mysql.xs > mysql.xsc && mv mysql.xsc mysql.c
Warning: duplicate function definition 'do' detected in mysql.xs, line 196
Warning: duplicate function definition 'rows' detected in mysql.xs, line 294
gcc -c -I/usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/DBI -I/usr/include/mysql -mcpu=i486 -fno-strength-reduce -D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -march=i386 -mcpu=i686 -g -DVERSION=\"2.9004\" -DXS_VERSION=\"2.9004\" -fPIC "-I/usr/lib/perl5/5.8.0/i386-linux-thread-multi/CORE" mysql.c
Running Mkbootstrap for DBD::mysql ()
chmod 644 mysql.bs
rm -f blib/arch/auto/DBD/mysql/mysql.so
LD_RUN_PATH="/usr/lib/mysql:/usr/local/lib:/lib" /usr/bin/perl myld gcc -shared -L/usr/local/lib dbdimp.o mysql.o -o blib/arch/auto/DBD/mysql/mysql.so -L/usr/lib/mysql -lmysqlclient -lz -lcrypt -lnsl -lm -lc -lnss_files -lnss_dns -lresolv -lc -lnss_files -lnss_dns -lresolv
chmod 755 blib/arch/auto/DBD/mysql/mysql.so
cp mysql.bs blib/arch/auto/DBD/mysql/mysql.bs
chmod 644 blib/arch/auto/DBD/mysql/mysql.bs
Manifying blib/man3/DBD::mysql.3pm
Manifying blib/man3/Mysql.3pm
Manifying blib/man3/DBD::mysql::INSTALL.3pm
Manifying blib/man3/Bundle:BD::mysql.3pm
/usr/bin/make -- OK
Running make test
PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00base...........ok
t/10dsnlist........DBI connect('test','',...) failed: Access denied for user: 'root@localhost' (Using password: NO) at t/10dsnlist.t line 45
Cannot connect: Access denied for user: 'root@localhost' (Using password: NO)
Either your server is not up and running or you have no
permissions for acessing the DSN DBI:mysql:test.
This test requires a running server and write permissions.
Please make sure your server is running and you have
permissions, then retry.
t/10dsnlist........dubious
Test returned status 10 (wstat 2560, 0xa00)
DIED. FAILED tests 1-9
Failed 9/9 tests, 0.00% okay
t/20createdrop.....DBI connect('test','',...) failed: Access denied for user: 'root@localhost' (Using password: NO) at t/20createdrop.t line 45
Cannot connect: Access denied for user: 'root@localhost' (Using password: NO)
Either your server is not up and running or you have no
permissions for acessing the DSN DBI:mysql:test.
This test requires a running server and write permissions.
Please make sure your server is running and you have
permissions, then retry.
t/20createdrop.....dubious
Test returned status 10 (wstat 2560, 0xa00)
DIED. FAILED tests 1-5
Failed 5/5 tests, 0.00% okay
t/30insertfetch....DBI connect('test','',...) failed: Access denied for user: 'root@localhost' (Using password: NO) at t/30insertfetch.t line 48
Cannot connect: Access denied for user: 'root@localhost' (Using password: NO)
Either your server is not up and running or you have no
permissions for acessing the DSN DBI:mysql:test.
This test requires a running server and write permissions.
Please make sure your server is running and you have
permissions, then retry.
t/30insertfetch....dubious
Test returned status 10 (wstat 2560, 0xa00)
DIED. FAILED tests 1-11
Failed 11/11 tests, 0.00% okay
t/40bindparam......DBI connect('test','',...) failed: Access denied for user: 'root@localhost' (Using password: NO) at t/40bindparam.t line 64
Cannot connect: Access denied for user: 'root@localhost' (Using password: NO)
Either your server is not up and running or you have no
permissions for acessing the DSN DBI:mysql:test.
This test requires a running server and write permissions.
Please make sure your server is running and you have
permissions, then retry.
t/40bindparam......dubious
Test returned status 10 (wstat 2560, 0xa00)
DIED. FAILED tests 1-28
Failed 28/28 tests, 0.00% okay
t/40blobs..........DBI connect('test','',...) failed: Access denied for user: 'root@localhost' (Using password: NO) at t/40blobs.t line 68
Cannot connect: Access denied for user: 'root@localhost' (Using password: NO)
Either your server is not up and running or you have no
permissions for acessing the DSN DBI:mysql:test.
This test requires a running server and write permissions.
Please make sure your server is running and you have
permissions, then retry.
t/40blobs..........dubious
Test returned status 10 (wstat 2560, 0xa00)
DIED. FAILED tests 1-11
Failed 11/11 tests, 0.00% okay
t/40listfields.....DBI connect('test','',...) failed: Access denied for user: 'root@localhost' (Using password: NO) at t/40listfields.t line 57
Cannot connect: Access denied for user: 'root@localhost' (Using password: NO)
Either your server is not up and running or you have no
permissions for acessing the DSN DBI:mysql:test.
This test requires a running server and write permissions.
Please make sure your server is running and you have
permissions, then retry.
t/40listfields.....dubious
Test returned status 10 (wstat 2560, 0xa00)
DIED. FAILED tests 1-18
Failed 18/18 tests, 0.00% okay
t/40nulls..........DBI connect('test','',...) failed: Access denied for user: 'root@localhost' (Using password: NO) at t/40nulls.t line 50
Cannot connect: Access denied for user: 'root@localhost' (Using password: NO)
Either your server is not up and running or you have no
permissions for acessing the DSN DBI:mysql:test.
This test requires a running server and write permissions.
Please make sure your server is running and you have
permissions, then retry.
t/40nulls..........dubious
Test returned status 10 (wstat 2560, 0xa00)
DIED. FAILED tests 1-11
Failed 11/11 tests, 0.00% okay
t/40numrows........DBI connect('test','',...) failed: Access denied for user: 'root@localhost' (Using password: NO) at t/40numrows.t line 59
Cannot connect: Access denied for user: 'root@localhost' (Using password: NO)
Either your server is not up and running or you have no
permissions for acessing the DSN DBI:mysql:test.
This test requires a running server and write permissions.
Please make sure your server is running and you have
permissions, then retry.
t/40numrows........dubious
Test returned status 10 (wstat 2560, 0xa00)
DIED. FAILED tests 1-25
Failed 25/25 tests, 0.00% okay
t/50chopblanks.....DBI connect('test','',...) failed: Access denied for user: 'root@localhost' (Using password: NO) at t/50chopblanks.t line 57
Cannot connect: Access denied for user: 'root@localhost' (Using password: NO)
Either your server is not up and running or you have no
permissions for acessing the DSN DBI:mysql:test.
This test requires a running server and write permissions.
Please make sure your server is running and you have
permissions, then retry.
t/50chopblanks.....dubious
Test returned status 10 (wstat 2560, 0xa00)
DIED. FAILED tests 1-35
Failed 35/35 tests, 0.00% okay
t/50commit.........DBI connect('test','',...) failed: Access denied for user: 'root@localhost' (Using password: NO) at t/50commit.t line 64
Can't call method "tables" on an undefined value at t/lib.pl line 216.
t/50commit.........dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 1-30
Failed 30/30 tests, 0.00% okay
t/60leaks..........skipped
all skipped: $ENV{SLOW_TESTS} is not set or Proc:
rocessTable not installed
t/ak-dbd...........DBI connect('test','',...) failed: Access denied for user: 'root@localhost' (Using password: NO) at t/ak-dbd.t line 59
t/ak-dbd...........NOK 1Can't call method "tables" on an undefined value at t/lib.pl line 216.
t/ak-dbd...........dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 1, 4-90
Failed 88/90 tests, 2.22% okay
t/akmisc...........Mysql connect('database=test;host=','',...) failed: Access denied for user: 'root@localhost' (Using password: NO) at t/akmisc.t line 140
Cannot connect: Access denied for user: 'root@localhost' (Using password: NO)
It looks as if your server is not up and running.
This test requires a running server.
Please make sure your server is running and retry.
t/akmisc...........dubious
Test returned status 10 (wstat 2560, 0xa00)
DIED. FAILED tests 1-351
Failed 351/351 tests, 0.00% okay
t/dbdadmin.........DBI connect('test','',...) failed: Access denied for user: 'root@localhost' (Using password: NO) at t/dbdadmin.t line 74
Cannot connect: Access denied for user: 'root@localhost' (Using password: NO)
Either your server is not up and running or you have no
permissions for acessing the DSN DBI:mysql:test.
This test requires a running server and write permissions.
Please make sure your server is running and you have
permissions, then retry.
t/dbdadmin.........dubious
Test returned status 10 (wstat 2560, 0xa00)
DIED. FAILED tests 1-21
Failed 21/21 tests, 0.00% okay
t/insertid.........DBI connect('test','',...) failed: Access denied for user: 'root@localhost' (Using password: NO) at t/insertid.t line 13
t/insertid.........dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 1-12
Failed 12/12 tests, 0.00% okay
t/mysql............Mysql connect('database=test;host=','',...) failed: Access denied for user: 'root@localhost' (Using password: NO) at t/mysql.t line 55
not ok 1: Access denied for user: 'root@localhost' (Using password: NO)
It looks as if your server is not up and running.
This test requires a running server.
Please make sure your server is running and retry.
t/mysql............FAILED tests 1-68
Failed 68/68 tests, 0.00% okay
t/mysql2...........Mysql connect('database=test;host=','',...) failed: Access denied for user: 'root@localhost' (Using password: NO) at t/mysql2.t line 29
Can't call method "getserverinfo" on an undefined value at t/mysql2.t line 30.
t/mysql2...........dubious
Test returned status 255 (wstat 65280, 0xff00)
Failed Test Stat Wstat Total Fail Failed List of Failed
-------------------------------------------------------------------------------
t/10dsnlist.t 10 2560 9 9 100.00% 1-9
t/20createdrop.t 10 2560 5 5 100.00% 1-5
t/30insertfetch.t 10 2560 11 11 100.00% 1-11
t/40bindparam.t 10 2560 28 28 100.00% 1-28
t/40blobs.t 10 2560 11 11 100.00% 1-11
t/40listfields.t 10 2560 18 18 100.00% 1-18
t/40nulls.t 10 2560 11 11 100.00% 1-11
t/40numrows.t 10 2560 25 25 100.00% 1-25
t/50chopblanks.t 10 2560 35 35 100.00% 1-35
t/50commit.t 255 65280 30 30 100.00% 1-30
t/ak-dbd.t 255 65280 90 88 97.78% 1 4-90
t/akmisc.t 10 2560 351 351 100.00% 1-351
t/dbdadmin.t 10 2560 21 21 100.00% 1-21
t/insertid.t 255 65280 12 12 100.00% 1-12
t/mysql.t 68 68 100.00% 1-68
t/mysql2.t 255 65280 ?? ?? % ??
1 test skipped.
Failed 16/18 test scripts, 11.11% okay. 723/730 subtests failed, 0.96% okay.
make: *** [test_dynamic] Error 2
/usr/bin/make test -- NOT OK
Running make install
make test had returned bad status, won't install without force
why isn't it connecting>?
cpan> install DBD::mysql
Running install for module DBD::mysql
Running make for R/RU/RUDY/DBD-mysql-2.9004.tar.gz
LWP not available
CPAN: Net::FTP loaded ok
Fetching with Net::FTP:
ftp://ftp.perl.org/pub/CPAN/authors...l-2.9004.tar.gz
CPAN: Digest::MD5 loaded ok
LWP not available
Fetching with Net::FTP:
ftp://ftp.perl.org/pub/CPAN/authors.../RUDY/CHECKSUMS
Checksum for /root/.cpan/sources/authors/id/R/RU/RUDY/DBD-mysql-2.9004.tar.gz ok
Scanning cache /root/.cpan/build for sizes
DBD-mysql-2.9004/
DBD-mysql-2.9004/t/
DBD-mysql-2.9004/t/mysql2.t
DBD-mysql-2.9004/t/akmisc.t
DBD-mysql-2.9004/t/60leaks.t
DBD-mysql-2.9004/t/10dsnlist.t
DBD-mysql-2.9004/t/ak-dbd.t
DBD-mysql-2.9004/t/50chopblanks.t
DBD-mysql-2.9004/t/mysql.t
DBD-mysql-2.9004/t/lib.pl
DBD-mysql-2.9004/t/40blobs.t
DBD-mysql-2.9004/t/40nulls.t
DBD-mysql-2.9004/t/insertid.t
DBD-mysql-2.9004/t/40listfields.t
DBD-mysql-2.9004/t/40bindparam.t
DBD-mysql-2.9004/t/mysql.dbtest
DBD-mysql-2.9004/t/dbdadmin.t
DBD-mysql-2.9004/t/20createdrop.t
DBD-mysql-2.9004/t/00base.t
DBD-mysql-2.9004/t/30insertfetch.t
DBD-mysql-2.9004/t/40numrows.t
DBD-mysql-2.9004/t/50commit.t
DBD-mysql-2.9004/t/mysql.mtest
DBD-mysql-2.9004/MANIFEST
DBD-mysql-2.9004/myld
DBD-mysql-2.9004/dbdimp.c
DBD-mysql-2.9004/lib/
DBD-mysql-2.9004/lib/DBD/
DBD-mysql-2.9004/lib/DBD/mysql/
DBD-mysql-2.9004/lib/DBD/mysql/GetInfo.pm
DBD-mysql-2.9004/lib/DBD/mysql/INSTALL.pod
DBD-mysql-2.9004/lib/DBD/mysql.pm
DBD-mysql-2.9004/lib/Mysql/
DBD-mysql-2.9004/lib/Mysql/Statement.pm
DBD-mysql-2.9004/lib/Bundle/
DBD-mysql-2.9004/lib/Bundle/DBD/
DBD-mysql-2.9004/lib/Bundle/DBD/mysql.pm
DBD-mysql-2.9004/lib/Mysql.pm
DBD-mysql-2.9004/dbdimp.h
DBD-mysql-2.9004/mysql.xs
DBD-mysql-2.9004/MANIFEST.SKIP
DBD-mysql-2.9004/README
DBD-mysql-2.9004/INSTALL.html
DBD-mysql-2.9004/META.yml
DBD-mysql-2.9004/Makefile.PL
DBD-mysql-2.9004/ChangeLog
DBD-mysql-2.9004/constants.h
DBD-mysql-2.9004/TODO
CPAN.pm: Going to build R/RU/RUDY/DBD-mysql-2.9004.tar.gz
I will use the following settings for compiling and testing:
cflags (mysql_config) = -I/usr/include/mysql -mcpu=i486 -fno-strength-reduce
libs (mysql_config) = -L/usr/lib/mysql -lmysqlclient -lz -lcrypt -lnsl -lm -lc -lnss_files -lnss_dns -lresolv -lc -lnss_files -lnss_dns -lresolv
nocatchstderr (default ) = 0
nofoundrows (default ) = 0
ssl (guessed ) = 0
testdb (default ) = test
testhost (default ) =
testpassword (default ) =
testuser (default ) =
To change these settings, see 'perl Makefile.PL --help' and
'perldoc INSTALL'.
Checking if your kit is complete...
Looks good
Multiple copies of Driver.xst found in: /usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/DBI /usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi/auto/DBI at Makefile.PL line 295
Using DBI 1.38 installed in /usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/DBI
Writing Makefile for DBD::mysql
cp lib/DBD/mysql/GetInfo.pm blib/lib/DBD/mysql/GetInfo.pm
cp lib/DBD/mysql.pm blib/lib/DBD/mysql.pm
cp lib/DBD/mysql/INSTALL.pod blib/lib/DBD/mysql/INSTALL.pod
cp lib/Mysql.pm blib/lib/Mysql.pm
cp lib/Mysql/Statement.pm blib/lib/Mysql/Statement.pm
cp lib/Bundle/DBD/mysql.pm blib/lib/Bundle/DBD/mysql.pm
gcc -c -I/usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/DBI -I/usr/include/mysql -mcpu=i486 -fno-strength-reduce -D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -march=i386 -mcpu=i686 -g -DVERSION=\"2.9004\" -DXS_VERSION=\"2.9004\" -fPIC "-I/usr/lib/perl5/5.8.0/i386-linux-thread-multi/CORE" dbdimp.c
/usr/bin/perl -p -e "s/~DRIVER~/mysql/g" /usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/DBI/Driver.xst > mysql.xsi
/usr/bin/perl /usr/lib/perl5/5.8.0/ExtUtils/xsubpp -typemap /usr/lib/perl5/5.8.0/ExtUtils/typemap mysql.xs > mysql.xsc && mv mysql.xsc mysql.c
Warning: duplicate function definition 'do' detected in mysql.xs, line 196
Warning: duplicate function definition 'rows' detected in mysql.xs, line 294
gcc -c -I/usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/DBI -I/usr/include/mysql -mcpu=i486 -fno-strength-reduce -D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -march=i386 -mcpu=i686 -g -DVERSION=\"2.9004\" -DXS_VERSION=\"2.9004\" -fPIC "-I/usr/lib/perl5/5.8.0/i386-linux-thread-multi/CORE" mysql.c
Running Mkbootstrap for DBD::mysql ()
chmod 644 mysql.bs
rm -f blib/arch/auto/DBD/mysql/mysql.so
LD_RUN_PATH="/usr/lib/mysql:/usr/local/lib:/lib" /usr/bin/perl myld gcc -shared -L/usr/local/lib dbdimp.o mysql.o -o blib/arch/auto/DBD/mysql/mysql.so -L/usr/lib/mysql -lmysqlclient -lz -lcrypt -lnsl -lm -lc -lnss_files -lnss_dns -lresolv -lc -lnss_files -lnss_dns -lresolv
chmod 755 blib/arch/auto/DBD/mysql/mysql.so
cp mysql.bs blib/arch/auto/DBD/mysql/mysql.bs
chmod 644 blib/arch/auto/DBD/mysql/mysql.bs
Manifying blib/man3/DBD::mysql.3pm
Manifying blib/man3/Mysql.3pm
Manifying blib/man3/DBD::mysql::INSTALL.3pm
Manifying blib/man3/Bundle:BD::mysql.3pm
/usr/bin/make -- OK
Running make test
PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00base...........ok
t/10dsnlist........DBI connect('test','',...) failed: Access denied for user: 'root@localhost' (Using password: NO) at t/10dsnlist.t line 45
Cannot connect: Access denied for user: 'root@localhost' (Using password: NO)
Either your server is not up and running or you have no
permissions for acessing the DSN DBI:mysql:test.
This test requires a running server and write permissions.
Please make sure your server is running and you have
permissions, then retry.
t/10dsnlist........dubious
Test returned status 10 (wstat 2560, 0xa00)
DIED. FAILED tests 1-9
Failed 9/9 tests, 0.00% okay
t/20createdrop.....DBI connect('test','',...) failed: Access denied for user: 'root@localhost' (Using password: NO) at t/20createdrop.t line 45
Cannot connect: Access denied for user: 'root@localhost' (Using password: NO)
Either your server is not up and running or you have no
permissions for acessing the DSN DBI:mysql:test.
This test requires a running server and write permissions.
Please make sure your server is running and you have
permissions, then retry.
t/20createdrop.....dubious
Test returned status 10 (wstat 2560, 0xa00)
DIED. FAILED tests 1-5
Failed 5/5 tests, 0.00% okay
t/30insertfetch....DBI connect('test','',...) failed: Access denied for user: 'root@localhost' (Using password: NO) at t/30insertfetch.t line 48
Cannot connect: Access denied for user: 'root@localhost' (Using password: NO)
Either your server is not up and running or you have no
permissions for acessing the DSN DBI:mysql:test.
This test requires a running server and write permissions.
Please make sure your server is running and you have
permissions, then retry.
t/30insertfetch....dubious
Test returned status 10 (wstat 2560, 0xa00)
DIED. FAILED tests 1-11
Failed 11/11 tests, 0.00% okay
t/40bindparam......DBI connect('test','',...) failed: Access denied for user: 'root@localhost' (Using password: NO) at t/40bindparam.t line 64
Cannot connect: Access denied for user: 'root@localhost' (Using password: NO)
Either your server is not up and running or you have no
permissions for acessing the DSN DBI:mysql:test.
This test requires a running server and write permissions.
Please make sure your server is running and you have
permissions, then retry.
t/40bindparam......dubious
Test returned status 10 (wstat 2560, 0xa00)
DIED. FAILED tests 1-28
Failed 28/28 tests, 0.00% okay
t/40blobs..........DBI connect('test','',...) failed: Access denied for user: 'root@localhost' (Using password: NO) at t/40blobs.t line 68
Cannot connect: Access denied for user: 'root@localhost' (Using password: NO)
Either your server is not up and running or you have no
permissions for acessing the DSN DBI:mysql:test.
This test requires a running server and write permissions.
Please make sure your server is running and you have
permissions, then retry.
t/40blobs..........dubious
Test returned status 10 (wstat 2560, 0xa00)
DIED. FAILED tests 1-11
Failed 11/11 tests, 0.00% okay
t/40listfields.....DBI connect('test','',...) failed: Access denied for user: 'root@localhost' (Using password: NO) at t/40listfields.t line 57
Cannot connect: Access denied for user: 'root@localhost' (Using password: NO)
Either your server is not up and running or you have no
permissions for acessing the DSN DBI:mysql:test.
This test requires a running server and write permissions.
Please make sure your server is running and you have
permissions, then retry.
t/40listfields.....dubious
Test returned status 10 (wstat 2560, 0xa00)
DIED. FAILED tests 1-18
Failed 18/18 tests, 0.00% okay
t/40nulls..........DBI connect('test','',...) failed: Access denied for user: 'root@localhost' (Using password: NO) at t/40nulls.t line 50
Cannot connect: Access denied for user: 'root@localhost' (Using password: NO)
Either your server is not up and running or you have no
permissions for acessing the DSN DBI:mysql:test.
This test requires a running server and write permissions.
Please make sure your server is running and you have
permissions, then retry.
t/40nulls..........dubious
Test returned status 10 (wstat 2560, 0xa00)
DIED. FAILED tests 1-11
Failed 11/11 tests, 0.00% okay
t/40numrows........DBI connect('test','',...) failed: Access denied for user: 'root@localhost' (Using password: NO) at t/40numrows.t line 59
Cannot connect: Access denied for user: 'root@localhost' (Using password: NO)
Either your server is not up and running or you have no
permissions for acessing the DSN DBI:mysql:test.
This test requires a running server and write permissions.
Please make sure your server is running and you have
permissions, then retry.
t/40numrows........dubious
Test returned status 10 (wstat 2560, 0xa00)
DIED. FAILED tests 1-25
Failed 25/25 tests, 0.00% okay
t/50chopblanks.....DBI connect('test','',...) failed: Access denied for user: 'root@localhost' (Using password: NO) at t/50chopblanks.t line 57
Cannot connect: Access denied for user: 'root@localhost' (Using password: NO)
Either your server is not up and running or you have no
permissions for acessing the DSN DBI:mysql:test.
This test requires a running server and write permissions.
Please make sure your server is running and you have
permissions, then retry.
t/50chopblanks.....dubious
Test returned status 10 (wstat 2560, 0xa00)
DIED. FAILED tests 1-35
Failed 35/35 tests, 0.00% okay
t/50commit.........DBI connect('test','',...) failed: Access denied for user: 'root@localhost' (Using password: NO) at t/50commit.t line 64
Can't call method "tables" on an undefined value at t/lib.pl line 216.
t/50commit.........dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 1-30
Failed 30/30 tests, 0.00% okay
t/60leaks..........skipped
all skipped: $ENV{SLOW_TESTS} is not set or Proc:
rocessTable not installed t/ak-dbd...........DBI connect('test','',...) failed: Access denied for user: 'root@localhost' (Using password: NO) at t/ak-dbd.t line 59
t/ak-dbd...........NOK 1Can't call method "tables" on an undefined value at t/lib.pl line 216.
t/ak-dbd...........dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 1, 4-90
Failed 88/90 tests, 2.22% okay
t/akmisc...........Mysql connect('database=test;host=','',...) failed: Access denied for user: 'root@localhost' (Using password: NO) at t/akmisc.t line 140
Cannot connect: Access denied for user: 'root@localhost' (Using password: NO)
It looks as if your server is not up and running.
This test requires a running server.
Please make sure your server is running and retry.
t/akmisc...........dubious
Test returned status 10 (wstat 2560, 0xa00)
DIED. FAILED tests 1-351
Failed 351/351 tests, 0.00% okay
t/dbdadmin.........DBI connect('test','',...) failed: Access denied for user: 'root@localhost' (Using password: NO) at t/dbdadmin.t line 74
Cannot connect: Access denied for user: 'root@localhost' (Using password: NO)
Either your server is not up and running or you have no
permissions for acessing the DSN DBI:mysql:test.
This test requires a running server and write permissions.
Please make sure your server is running and you have
permissions, then retry.
t/dbdadmin.........dubious
Test returned status 10 (wstat 2560, 0xa00)
DIED. FAILED tests 1-21
Failed 21/21 tests, 0.00% okay
t/insertid.........DBI connect('test','',...) failed: Access denied for user: 'root@localhost' (Using password: NO) at t/insertid.t line 13
t/insertid.........dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 1-12
Failed 12/12 tests, 0.00% okay
t/mysql............Mysql connect('database=test;host=','',...) failed: Access denied for user: 'root@localhost' (Using password: NO) at t/mysql.t line 55
not ok 1: Access denied for user: 'root@localhost' (Using password: NO)
It looks as if your server is not up and running.
This test requires a running server.
Please make sure your server is running and retry.
t/mysql............FAILED tests 1-68
Failed 68/68 tests, 0.00% okay
t/mysql2...........Mysql connect('database=test;host=','',...) failed: Access denied for user: 'root@localhost' (Using password: NO) at t/mysql2.t line 29
Can't call method "getserverinfo" on an undefined value at t/mysql2.t line 30.
t/mysql2...........dubious
Test returned status 255 (wstat 65280, 0xff00)
Failed Test Stat Wstat Total Fail Failed List of Failed
-------------------------------------------------------------------------------
t/10dsnlist.t 10 2560 9 9 100.00% 1-9
t/20createdrop.t 10 2560 5 5 100.00% 1-5
t/30insertfetch.t 10 2560 11 11 100.00% 1-11
t/40bindparam.t 10 2560 28 28 100.00% 1-28
t/40blobs.t 10 2560 11 11 100.00% 1-11
t/40listfields.t 10 2560 18 18 100.00% 1-18
t/40nulls.t 10 2560 11 11 100.00% 1-11
t/40numrows.t 10 2560 25 25 100.00% 1-25
t/50chopblanks.t 10 2560 35 35 100.00% 1-35
t/50commit.t 255 65280 30 30 100.00% 1-30
t/ak-dbd.t 255 65280 90 88 97.78% 1 4-90
t/akmisc.t 10 2560 351 351 100.00% 1-351
t/dbdadmin.t 10 2560 21 21 100.00% 1-21
t/insertid.t 255 65280 12 12 100.00% 1-12
t/mysql.t 68 68 100.00% 1-68
t/mysql2.t 255 65280 ?? ?? % ??
1 test skipped.
Failed 16/18 test scripts, 11.11% okay. 723/730 subtests failed, 0.96% okay.
make: *** [test_dynamic] Error 2
/usr/bin/make test -- NOT OK
Running make install
make test had returned bad status, won't install without force
why isn't it connecting>?
hostpc.com
Verified User
wget http://www.cpan.org/modules/by-module/DBD/DBI-1.38.tar.gz
tar xvzf DBI-1.38.tar.gz
cd DBI-1.38
perl Makefile.pl
make
make install
cd ..
wget http://www.cpan.org/modules/by-module/DBD/DBD-mysql-2.9002.tar.gz
tar xvzf DBD-mysql-2.9002.tar.gz
cd DBD-mysql-2.9002
perl Makefile.pl
make
make install
tar xvzf DBI-1.38.tar.gz
cd DBI-1.38
perl Makefile.pl
make
make install
cd ..
wget http://www.cpan.org/modules/by-module/DBD/DBD-mysql-2.9002.tar.gz
tar xvzf DBD-mysql-2.9002.tar.gz
cd DBD-mysql-2.9002
perl Makefile.pl
make
make install
Sorry to dig up an old thread, but...
I have been doing the above, as per http://help.directadmin.com/item.php?id=49
I get to doing the 2nd Makefile.PL and get:
[root@kcserver DBD-mysql-2.9002]# perl Makefile.PL
I will use the following settings for compiling and testing:
cflags (mysql_config) = -I/usr/include/mysql -mcpu=i486 -fno-strength-reduce
libs (mysql_config) = -L/usr/lib/mysql -lmysqlclient -lz -lcrypt -lnsl -lm -lc -lnss_files -lnss_dns -lresolv -lc -lnss_files -lnss_dns -lresolv
nocatchstderr (default ) = 0
nofoundrows (default ) = 0
ssl (guessed ) = 0
testdb (default ) = test
testhost (default ) =
testpassword (default ) =
testuser (default ) =
To change these settings, see 'perl Makefile.PL --help' and
'perldoc INSTALL'.
Checking if your kit is complete...
Looks good
Warning: prerequisite DBI 1.08 not found.
Can't locate DBI/DBD.pm in @INC (@INC contains: /usr/lib/perl5/5.8.0/i386-linux-thread-multi /usr/lib/perl5/5.8.0 /usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.0 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.0 /usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.0/i386-linux-thread-multi /usr/lib/perl5/5.8.0 .) at Makefile.PL line 294.
[root@kcserver DBD-mysql-2.9002]#
Any ideas?
I have been doing the above, as per http://help.directadmin.com/item.php?id=49
I get to doing the 2nd Makefile.PL and get:
[root@kcserver DBD-mysql-2.9002]# perl Makefile.PL
I will use the following settings for compiling and testing:
cflags (mysql_config) = -I/usr/include/mysql -mcpu=i486 -fno-strength-reduce
libs (mysql_config) = -L/usr/lib/mysql -lmysqlclient -lz -lcrypt -lnsl -lm -lc -lnss_files -lnss_dns -lresolv -lc -lnss_files -lnss_dns -lresolv
nocatchstderr (default ) = 0
nofoundrows (default ) = 0
ssl (guessed ) = 0
testdb (default ) = test
testhost (default ) =
testpassword (default ) =
testuser (default ) =
To change these settings, see 'perl Makefile.PL --help' and
'perldoc INSTALL'.
Checking if your kit is complete...
Looks good
Warning: prerequisite DBI 1.08 not found.
Can't locate DBI/DBD.pm in @INC (@INC contains: /usr/lib/perl5/5.8.0/i386-linux-thread-multi /usr/lib/perl5/5.8.0 /usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.0 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.0 /usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.0/i386-linux-thread-multi /usr/lib/perl5/5.8.0 .) at Makefile.PL line 294.
[root@kcserver DBD-mysql-2.9002]#
Any ideas?
hostpc.com
Verified User
What OS ?
CentOS has Yum which makes this much easier now...
Otherwise, install perl DBI first, thats the prerequisite.
Joe
CentOS has Yum which makes this much easier now...
Otherwise, install perl DBI first, thats the prerequisite.
Joe