Upgrade/update and now no named

J

jag7720

Verified User
Joined
Aug 20, 2009
Messages
6
I followed this
http://help.directadmin.com/item.php?id=247
and now named will not start

Yum no longer works. It says "No module named cElementTree"

So I pulled down python-celementtree-1.0.5-1.2.el5.rf.x86_64.rpm

and tried to install it with RPM and I get this

ibc.so.6()(64bit) is needed by python-celementtree-1.0.5-1.2.el5.rf.x86_64
libc.so.6(GLIBC_2.2.5)(64bit) is needed by python-celementtree-1.0.5-1.2.el5.rf.x86_64
libc.so.6(GLIBC_2.3.4)(64bit) is needed by python-celementtree-1.0.5-1.2.el5.rf.x86_64
libc.so.6(GLIBC_2.4)(64bit) is needed by python-celementtree-1.0.5-1.2.el5.rf.x86_64
libpthread.so.0()(64bit) is needed by python-celementtree-1.0.5-1.2.el5.rf.x86_64
python-elementtree conflicts with python-celementtree-1.0.5-1.2.el5.rf.x86_64


Any ideas what is going on and how to fix it?
 
Reply to my post with an update... I got yum reinstalled but I am still getting this error

[root@server yum-rpm]# yum
There was a problem importing one of the Python modules
required to run yum. The error leading to this problem was:

No module named cElementTree

Please install a package which provides this module, or
verify that the module is installed correctly.

It's possible that the above module doesn't match the
current version of Python, which is:
2.4.3 (#1, Sep 3 2009, 15:37:12)
[GCC 4.1.2 20080704 (Red Hat 4.1.2-46)]

If you cannot solve this problem yourself, please go to
the yum faq at:
http://wiki.linux.duke.edu/YumFaq


Yum is not working and my named server is not working after an update.

Please help
 
I don't meant ot hijack my own post but I have an update...

named would not start because of a ban zone
_default/xxx.xxx.xxx.xxx.in-addr.arpa


But yum is still not functioning.

Anyone have any clues about yum not working after an update/upgrade?
 
Unless you have ptr control you have no need for arpa records.

To fix your yum you should reinstall yum via rpm.
 
I reinstalled yum from RPM and I am still getting this issue.

I even installed the python-elementtree-1.2.6-7.el4.rf.i386.rpm

Any other ideas?


[root@server yum-rpm]# yum
There was a problem importing one of the Python modules
required to run yum. The error leading to this problem was:

No module named cElementTree

Please install a package which provides this module, or
verify that the module is installed correctly.

It's possible that the above module doesn't match the
current version of Python, which is:
2.4.3 (#1, Sep 3 2009, 15:37:12)
[GCC 4.1.2 20080704 (Red Hat 4.1.2-46)]

If you cannot solve this problem yourself, please go to
the yum faq at:
http://wiki.linux.duke.edu/YumFaq
 
yes... except they say to rebuild from source and really, what is the point of that when I can get the Distro RPMs?

I uninstalled the RPMs, downloaded the Distro RPMs and reinstalled.... still have the issue.
 
Maybe because the RPM's install isn't working for you? That would be a good enough reason for me.

Jeff
 
Have you tried this: https://www.centos.org/modules/newbb/viewtopic.php?forum=42&topic_id=3401&viewmode=threaded

I have had this error myself due to my custom installation, the fix is fairly easy. Download the source rpm for yum and rebuild it;

rpm --rebuild yum-2.4.2-2.centos4.src.rpm

Then installed the just built binary rpm;

rpm -Uvh /usr/src/redhat/RPMS/noarch/yum-2.4.2-2.centos4.noarch.rpm --force

yum should work after this.
Click to expand...

Of course you need to adjust the version numbers for what you are using.
 
You must log in or register to reply here.
Back
Top