[tools] update.script

ITDevil · Jan 14, 2008

I am just curious to ask why update.script still using a older version of IMAP 2004c1, at the UW IMAP site the latest version is imap-2006k

Release Notes: http://www.washington.edu/imap/documentation/RELNOTES.html

siulun · Jan 14, 2008

ZATZAi said:
It should be noted that "MODsecurity 2.1.4 Apache 2.2.6 & custombuild ONLY" will only work if you installed Apache using custombuild v1.2, it won't work if you used v1.1.

Sorry but what made you say that, I'm using 1.1 custombuild and this installed and works fine for me...

ZATZAi · Jan 14, 2008

siulun said:
Sorry but what made you say that, I'm using 1.1 custombuild and this installed and works fine for me...

I said that because I had the opposite experience. When building Apache with custombuild 1.1 it didn't compile Apache with "--with-pcre=/usr" as mentioned here. It was said by smtalk that he added that in to custombuild here but I'm not sure he added it to 1.1 and 1.2 alike (Yes and re-downloaded and did a clean install since he mentioned that). So modsecurity2 was failing to install for me, but if I used custombuild 1.2 it worked fine.

smtalk · Jan 14, 2008

Hello,

PCRE is included into 1.1 version of the CustomBuild script now (from yesterday). It was removed for few days due to many failed installs. So, it should work without any problems with CustomBuild 1.1 now.

rizwan65 · Jan 15, 2008

Hi everybody
I have installed few thing with update.script
But I am facing few problems with one of my Forum software VBulletin

Could you plz let me know how could I uninstall these softwares
Is there any script for uninstalling these

@how@ · Jan 15, 2008

rizwan65 said:
Hi everybody
I have installed few thing with update.script
But I am facing few problems with one of my Forum software VBulletin

Could you plz let me know how could I uninstall these softwares
Is there any script for uninstalling these

Code:

<IfModule mod_security2.c>
# ModSecurity2 ONLY
# All time config.conf and apache2-rules.conf ON
# Do not change anything in included files
#
Include /etc/modsecurity2/config.conf
#Include /etc/modsecurity2/apache2-rules.conf
#Include /etc/modsecurity2/bad_robots.conf
#Include /etc/modsecurity2/blacklist.conf
#Include /etc/modsecurity2/blacklist2.conf
#Include /etc/modsecurity2/exclude.conf
## stop #Include /etc/modsecurity2/generic_attacks.conf
#Include /etc/modsecurity2/http_policy.conf
#Include /etc/modsecurity2/jitp.conf
#Include /etc/modsecurity2/outbound.conf
#Include /etc/modsecurity2/protocol_anomalies.conf
#Include /etc/modsecurity2/protocol_violations.conf
#Include /etc/modsecurity2/recons.conf
#Include /etc/modsecurity2/request_limits.conf
#Include /etc/modsecurity2/rootkits.conf
#Include /etc/modsecurity2/trojans.conf
#Include /etc/modsecurity2/useragents.conf
</IfModule>

restart apache or remove # trojans.conf , useragents.conf
use any rules you want

Wael

@how@ · Jan 15, 2008

smtalk said:
Hello,

PCRE is included into 1.1 version of the CustomBuild script now (from yesterday). It was removed for few days due to many failed installs. So, it should work without any problems with CustomBuild 1.1 now.

I know you fix it

good work

Wael

rizwan65 · Jan 15, 2008

@how@
Thanks for you help

Plz let me know is this problem due to Mod_Security

And secondly I have installed mod_security 1.9.5 for apache 1

And many other softwares i.e. Nobody Check Security Tool 1.03 eAccelerator 0.9.5.2 MODevasive 1.10.1

Do I need to remove these also

Regards
Rizwan

@how@ said:

Code:

<IfModule mod_security2.c>
# ModSecurity2 ONLY
# All time config.conf and apache2-rules.conf ON
# Do not change anything in included files
#
Include /etc/modsecurity2/config.conf
#Include /etc/modsecurity2/apache2-rules.conf
#Include /etc/modsecurity2/bad_robots.conf
#Include /etc/modsecurity2/blacklist.conf
#Include /etc/modsecurity2/blacklist2.conf
#Include /etc/modsecurity2/exclude.conf
## stop #Include /etc/modsecurity2/generic_attacks.conf
#Include /etc/modsecurity2/http_policy.conf
#Include /etc/modsecurity2/jitp.conf
#Include /etc/modsecurity2/outbound.conf
#Include /etc/modsecurity2/protocol_anomalies.conf
#Include /etc/modsecurity2/protocol_violations.conf
#Include /etc/modsecurity2/recons.conf
#Include /etc/modsecurity2/request_limits.conf
#Include /etc/modsecurity2/rootkits.conf
#Include /etc/modsecurity2/trojans.conf
#Include /etc/modsecurity2/useragents.conf
</IfModule>

restart apache or remove # trojans.conf , useragents.conf
use any rules you want

Wael

@how@ · Jan 16, 2008

you install mod_security 1.9.5 for apache 1 and ou to remove mod_security 1 rule.

Wael

ZATZAi · Jan 16, 2008

smtalk said:
Hello,

PCRE is included into 1.1 version of the CustomBuild script now (from yesterday). It was removed for few days due to many failed installs. So, it should work without any problems with CustomBuild 1.1 now.

Thanks smtalk.

rizwan65 · Jan 16, 2008

@how@ said:
you install mod_security 1.9.5 for apache 1 and ou to remove mod_security 1 rule.

Wael

Wael
Sorry I could not understand what you are saying

"you install mod_security 1.9.5 for apache 1 and ou to remove mod_security 1 rule."

@how@ · Jan 16, 2008

remove what you add in httpd.conf

Wael

hanh_bk · Jan 18, 2008

[root@server ~]# kiss status
Chain INPUT (policy ACCEPT)
target prot opt source destination

Chain FORWARD (policy ACCEPT)
target prot opt source destination

Chain OUTPUT (policy ACCEPT)
target prot opt source destination

KISS My Firewall - Stopped!

Help me, Please

clbbhk · Jan 18, 2008

After installed the MODsecurity 2.1.4 .....
The loading is so high.....
how to slove it?

@how@ · Jan 18, 2008

hanh_bk said:
Help me, Please

kiss start

@how@ · Jan 18, 2008

clbbhk said:
After installed the MODsecurity 2.1.4 .....
The loading is so high.....
how to slove it?

remove some rule in httpd.conf

Wael

hanh_bk · Jan 18, 2008

@how@ said:
kiss start

Sorry.
When i run command : kiss start:

[root@server ~]# kiss start
Since the ip_tables, ipt_state, and/or ipt_multiport modules do not exist, KISS can not function. Firewall script aborted!

ITDevil · Jan 19, 2008

hanh_bk said:
Sorry.
When i run command : kiss start:

you need to link xt_state.ko to ipt_state.ko and xt_multiport.ko to ipt_multiport.ko

Code:

$ ln -s /lib/modules/2.6.18-53.1.4.el5/kernel/net/netfilter/xt_state.ko /lib/modules/2.6.18-53.1.4.el5/kernel/net/ipv4/netfilter/ipt_state.ko

$ ln -s /lib/modules/2.6.18-53.1.4.el5/kernel/net/netfilter/xt_multiport.ko /lib/modules/2.6.18-53.1.4.el5/kernel/net/ipv4/netfilter/ipt_multiport.ko

REPLACE 2.6.18-53.1.4.el5 with your Kernel Folder

I hope it helps

hanh_bk · Jan 19, 2008

ITDevil said:
you need to link xt_state.ko to ipt_state.ko and xt_multiport.ko to ipt_multiport.ko

Code:

$ ln -s /lib/modules/2.6.18-53.1.4.el5/kernel/net/netfilter/xt_state.ko /lib/modules/2.6.18-53.1.4.el5/kernel/net/ipv4/netfilter/ipt_state.ko $ ln -s /lib/modules/2.6.18-53.1.4.el5/kernel/net/netfilter/xt_multiport.ko /lib/modules/2.6.18-53.1.4.el5/kernel/net/ipv4/netfilter/ipt_multiport.ko

REPLACE 2.6.18-53.1.4.el5 with your Kernel Folder

I hope it helps

Thank you very much!

hanh_bk · Jan 19, 2008

i have 2 problems after install update.script:
1. Roundcube webmail can't login
2. I want to config Kiss but i don't understand about it.
Please help me.

[tools] update.script

Do you like use update.script ?

yes, all time

no, some time

some time

Verified User

Verified User

Verified User

Administrator

Verified User

Verified User

Verified User

Verified User

Verified User

Verified User

Verified User

Verified User

Verified User

Verified User

Verified User

Verified User

Verified User

Verified User

Verified User

Verified User