[HOWTO] mod_ruid2

Did you wait for DNS propagation? Does any error appeared?

Can you create a subdomain and give me the subdomain.domain.tld and the ip for a test?

Regards
 
I sent PM.

DNS propogation is not needed i think because this domain is in this ip for a long time. For this apache issue i reinstalled server.

Thanks
 
Last edited:
Ive already tested an replied.

I suppose is just a DNS propagation issue cause manual edit on hosts files make me see subdomain placeholder without issue.

Regards
 
Ok i am going to wait if it is going to work or not. Should i do something else about the files which gives error if i add.

<Directory "/var/www/html">
Options -Indexes FollowSymLinks
AllowOverride All
Order allow,deny
Allow from all
<IfModule mod_suphp.c>
suPHP_Engine On
suPHP_UserGroup webapps webapps
SetEnv PHP_INI_SCAN_DIR
</IfModule>
RUidGid webapps webapps
</Directory>
 
You had right guess about propogation of subdomains one worked (email.....com)

nano -w /etc/httpd/conf/httpd.conf

and adding exactly the same code which i post at the end of the conf. file.

After this when i restart apache it says failed.

Thanks for the assistance.
 
mmmh the guide sayd to add the code between lines:

Add the line below between the <Directory "/var/www/html"> and </Directory>
Code: 
<Directory "/var/www/html">
    Options -Indexes FollowSymLinks
    AllowOverride All
    Order allow,deny
    Allow from all
   <IfModule mod_suphp.c>
        suPHP_Engine On
        suPHP_UserGroup webapps webapps
        SetEnv PHP_INI_SCAN_DIR
   </IfModule>
   RUidGid webapps webapps
</Directory>
So, you need to remove the lines you added, find the <Directory "/var/www/html"> line and let it look like the one you up here.

Regards
 
I couldnt find the directory. It seems apache 2.2 conf file i updated to 2.4.1 is it in another place??

Code: 
#
# This is the main Apache HTTP server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see 
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned.  

ServerRoot "/etc/httpd"
Listen 80

#LoadModule dummy_module /usr/lib/apache/mod_dummy.so
#LoadModule php5_module        /usr/lib/apache/libphp5.so
LoadModule ruid2_module       /usr/lib/apache/mod_ruid2.so
Include	/etc/httpd/conf/extra/httpd-phpmodules.conf

User apache
Group apache

ServerAdmin admin@localhost
DocumentRoot "/var/www/html"

# Options and AllowOverrides
Include conf/extra/httpd-directories.conf

<IfModule dir_module>
    DirectoryIndex index.html index.htm index.shtml index.php index.php5 index.php4 index.php3 index.phtml index.cgi
</IfModule>

<FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
    Satisfy All
</FilesMatch>

ErrorLog /var/log/httpd/error_log
LogLevel warn

<IfModule log_config_module>
    #replace %b with %O for more accurate logging
    <IfModule mod_logio.c>
      LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined
      LogFormat "%h %l %u %t \"%r\" %>s %O" common
      LogFormat "%O %I" bytes

      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>

    CustomLog /var/log/httpd/access_log common
</IfModule>

<IfModule alias_module>
    # Include some DirectAdmin alias
    Include conf/extra/httpd-alias.conf
</IfModule>

DefaultType text/plain

<IfModule mime_module>
    TypesConfig conf/mime.types
    AddType application/x-gzip .tgz
    AddEncoding x-compress .Z
    AddEncoding x-gzip .gz .tgz
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz
    AddHandler cgi-script .cgi
    AddHandler type-map var
    AddType text/html .shtml
    AddOutputFilter INCLUDES .shtml
	AddType video/x-ms-asf .avi
	AddType video/mpeg .mpg
	AddType video/mpeg .mpeg
	AddType video/quicktime .mov
	AddType video/x-ms-wmv .wmv
</IfModule>

#EnableMMAP off
#EnableSendfile off

#######################################################################################
# Do not change anything in included files, because they are rewritten by DirectAdmin #
#######################################################################################

# This is needed for PHP
Include conf/extra/httpd-php-handlers.conf

# Server-pool management (MPM specific)
Include conf/extra/httpd-mpm.conf

# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf

# Fancy directory listings
Include conf/extra/httpd-autoindex.conf

# Language settings
Include conf/extra/httpd-languages.conf

# User home directories
#Include conf/extra/httpd-userdir.conf

# Real-time info on requests and configuration
Include conf/extra/httpd-info.conf

# Virtual hosts
Include conf/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)
Include conf/extra/httpd-dav.conf

# Various default settings
Include conf/extra/httpd-default.conf

# Secure (SSL/TLS) connections
Include conf/extra/httpd-ssl.conf

# Deflate module settings
Include conf/extra/httpd-deflate.conf

# All the DirectAdmin vhosts
Include conf/extra/directadmin-vhosts.conf

# All suPHP directives
Include conf/extra/httpd-suphp.conf

# For user configurations not maintained by DirectAdmin. Empty by default.
Include conf/extra/httpd-includes.conf

#######################################################################################
# End of included files that are rewritten by DirectAdmin                             #
#######################################################################################

<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
 
From what I've heard it has indeed been removed at 2.4. In file /etc/httpd/conf/extra/httpd-directories.conf you can find the same <Directory "/var/www/html"> block in either case.
 
Depending on the version of DirectAdmin you're using, that step may no longer be necessary. I'd recommend you first be sure that DirectAdmin is at the latest version, and then remove these templates from the custom directory.

Jeff
 
Everything seem works fine at the moment. Only issue is the amount of total ram is too high (750 - 800 MB consuming) . I installed Centos 6 - 64 bit with Apache 2.4, modruid2, CB1.2 it wasnt as much as this before on 32 bit centos 5 server. What do you recommend which version of Centos should i use with this configuration.. what are your recommendations.


Thanks.
 
How can i findout that it is cached or permanent memory consuming is there any trics to improve performance with this configuration.
 
Result ;

Total Mem : 2097152 Used : 764968 Free : 1332184 Shared : 0 Buffers : 0 Cached : 0 Swap : 0


Isnt it much for a new installation?
 
Last edited:
Yes I am . If i go Centos 6 -32 bit could it be useful for Ram And Performance? On the other hand i get brute forces as seen below is it also effecting server?

Code: 
000000024	Brute-Force Attack detected in service log on User(s) root	Today at 12:17	
000000023	Brute-Force Attack detected in service log from IP(s) 69.148.186.174	Today at 12:00	
000000022	Brute-Force Attack detected in service log on User(s) root	Today at 11:17	
000000021	Brute-Force Attack detected in service log from IP(s) 69.148.186.174	Today at 11:00	
000000020	Brute-Force Attack detected in service log on User(s) root	Today at 10:17	
000000019	Brute-Force Attack detected in service log from IP(s) 69.148.186.174	Today at 10:00	
000000018	Brute-Force Attack detected in service log from IP(s) 69.148.186.174	Today at 09:00	
000000017	Brute-Force Attack detected in service log from IP(s) 69.148.186.174	Today at 08:00	
000000016	Brute-Force Attack detected in service log from IP(s) 69.148.186.174	Today at 07:00	
000000015	Brute-Force Attack detected in service log from IP(s) 69.148.186.174	Today at 06:00	
000000014	Brute-Force Attack detected in service log from IP(s) 69.148.186.174	Today at 05:00	
000000013	Brute-Force Attack detected in service log from IP(s) 69.148.186.174	Today at 04:00	
000000012	Brute-Force Attack detected in service log on User(s) root	Today at 03:32	
000000011	Brute-Force Attack detected in service log from IP(s) 69.148.186.174	Today at 03:00	
000000010	Brute-Force Attack detected in service log on User(s) root	Today at 02:32
 
So a QuadCore, i suppose 64Bit is the way, well, i would also suggest to increase ram, but.. shouldnt be that slow on a fresh install.

What is top command reporting?

Regards
 
You must log in or register to reply here.
Back
Top