Mail stays in mail queue (not Frozen)

T

terrabel

Verified User
Joined
May 6, 2008
Messages
20
I am new to DA, and just started with a new server. The mail worked fine form standard installation and after the switch to exim.
Then I started with Spamassin and ClamAV.
Now my mail stays in the queue and nothing can be picked up by the user (either via pop mail or webmail).
Can anybody give me the hint to where I made the mistake? Thank you already.

Ron Hoskens,
The Netherlands.
 
Did you have a look at /var/log/exim/mainlog or /var/log/maillog already?
You might find some more information in there.
 
thank you

I did indeed, and didn't find anything helpful.
In the end I changed to the original exim config file, and now the mails come through. I lost the ones that were in the queue, but it looks like it works now.
Then later on I will try to ad the spamassin and clamav options again.
I really would like to get that working.
thanks for the reply.

Ron.
 
still problems with mailqueue

The mailqueue works, but with a half an hour delay. (at least).
I keep getting
Code: 
R=virtual_user T=virtual_localdelivery defer (13): Permission denied: failed to create directories for /var/spool/virtual/domain.nl: Permission denied
any body a idea?
I have run the script to set the permissions alread. didn do any good.

thanks for support.
Ron.
 
Strange

I also have a list active for this domain, and when sending mail to the list it shows the following (as errors in the log):
Code: 
2008-05-27 13:37:26 [email protected] <[email protected]> R=virtual_user T=virtual_localdelivery defer (13): Permission denied: failed to create directories for /var/spool/virtual/tbaplus.nl: Permission denied
2008-05-27 13:37:29 [email protected] <[email protected]>: local_delivery transport succeeded

How can that be? it really dellivers to the 1 user, but not immediatly to the other. after half an hour or so it will deliver both.

Firthermore, I see in the Log section of the DA interface that there is a Exim Maillog and a System maillog.
Exim shows ie:
Code: 
2008-05-27 14:48:27 1K0ybK-0001yp-KE <= [email protected] H=(92-124-6-26.pppoe.irtel.ru) [92.124.6.26] P=esmtp S=2746 id=000501c8bff7$046e9c6b$0127f591@taqxgvuu T="Luxury Footwear and Leather products blowout sale" from <[email protected]> for [email protected]
2008-05-27 14:48:27 1K0ybL-0001yt-3S <= [email protected] U=mail P=spam-scanned S=9184 id=000501c8bff7$046e9c6b$0127f591@taqxgvuu T="*****SPAM***** Luxury Footwear and Leather products blowout sale" from <[email protected]> for [email protected]
2008-05-27 14:48:27 1K0ybL-0001yt-3S => discarded <[email protected]> R=domain_filter
2008-05-27 14:48:27 1K0ybL-0001yt-3S Completed
2008-05-27 14:48:27 1K0ybK-0001yp-KE => draadloos <[email protected]> F=<[email protected]> R=spamcheck_director T=spamcheck S=9067
2008-05-27 14:48:27 1K0ybK-0001yp-KE Completed
2008-05-27 14:48:35 H=([82.114.71.98]) [82.114.71.98] F=<[email protected]> rejected RCPT <[email protected]>: 
2008-05-27 14:48:36 H=([82.114.71.98]) [82.114.71.98] incomplete transaction (QUIT) from <[email protected]>
2008-05-27 14:48:39 1K0ybW-0001z1-TC <= [email protected] H=tapps.mail.domain4.com [194.9.84.153] P=esmtp S=10859 [email protected] T="Laatste kans: 1 miljoen prijzen in De-Grootste-Bingo-Ooit!" from <[email protected]> for [email protected]
2008-05-27 14:48:40 1K0ybX-0001z4-3N <= [email protected] U=mail P=spam-scanned S=11268 [email protected] T="Laatste kans: 1 miljoen prijzen in De-Grootste-Bingo-Ooit!" from <[email protected]> for [email protected]
2008-05-27 14:48:40 1K0ybX-0001z4-3N == [email protected] R=virtual_user T=virtual_localdelivery defer (13): Permission denied: failed to create directories for /var/spool/virtual/domain3.nl: Permission denied
2008-05-27 14:48:40 1K0ybW-0001z1-TC => usery <[email protected]> F=<[email protected]> R=spamcheck_director T=spamcheck S=11151
2008-05-27 14:48:40 1K0ybW-0001z1-TC Completed

System maillog shows:
Code: 
May 27 14:45:15 server dovecot[5350]: pop3-login: Disconnected: rip=85.234.152.91, lip=xxx.xxx.xxx.xxx
May 27 14:45:20 server spamd[5076]: spamd: connection from localhost.localdomain [127.0.0.1] at port 46993 
May 27 14:45:20 server spamd[5076]: spamd: setuid to user succeeded 
May 27 14:45:20 server spamd[5076]: spamd: processing message <01c8c025$6d4aca00$2606443a@dfc> for user:507 
May 27 14:45:20 server spamd[5076]: spamd: identified spam (13.3/5.0) for user:507 in 0.3 seconds, 963 bytes. 
May 27 14:45:20 server spamd[5076]: spamd: result: Y 13 - FAKE_REPLY_C,RCVD_IN_BL_SPAMCOP_NET,RCVD_IN_PBL,RCVD_IN_XBL,URIBL_RHS_DOB,URIBL_SC_SURBL,URIBL_WS_SURBL scantime=0.3,size=963,user=user,uid=507,required_score=5.0,rhost=localhost.localdomain,raddr=127.0.0.1,rport=46993,mid=<01c8c025$6d4aca00$2606443a@dfc>,autolearn=spam 
May 27 14:45:20 server spamd[4937]: prefork: child states: II 
May 27 14:45:26 server dovecot[5350]: pop3-login: Login: user=<user>, method=PLAIN, rip=212.61.100.254, lip=xxx.xxx.xxx.xxx
May 27 14:45:26 server dovecot[5350]: POP3(user): Disconnected: Logged out top=0/0, retr=0/0, del=0/0, size=0
May 27 14:45:27 server dovecot[5350]: pop3-login: Login: user=<systeem>, method=PLAIN, rip=212.61.100.254, lip=xxx.xxx.xxx.xxx
May 27 14:45:27 server dovecot[5350]: POP3(systeem): Disconnected: Logged out top=0/0, retr=0/0, del=0/0, size=0
May 27 14:45:27 server dovecot[5350]: auth(default): shadow([email protected],212.61.100.254): unknown user
May 27 14:45:27 server dovecot[5350]: auth(default): passwd([email protected],212.61.100.254): unknown user
May 27 14:45:27 server dovecot[5350]: pop3-login: Login: user=<[email protected]>, method=PLAIN, rip=212.61.100.254, lip=xxx.xxx.xxx.xxx
May 27 14:45:28 server dovecot[5350]: POP3([email protected]): Disconnected: Logged out top=0/0, retr=0/0, del=0/0, size=0

Is there meant to be two mail logs? and does anybody see anything strange except the permission dinied problem?
Can anybody help with a solution?

Ron.
 
Try this:

Copy the code below into file:

/var/spool/virtual/rebuild

Type:

chmod 750 ./rebuild

Then type:

./rebuild


Code: 
#!/bin/sh

pwd=$(pwd) # Keep set to pwd or set to full path to the pwd command.    
whoami=$(whoami) # Keep set to whoami or set to full path of whoami command.


################### DO NOT TOUCH CODE UNDER HERE #####################


domainowners=$(cat /etc/virtual/domainowners | sed 's/://' | tr -s ' ' ':')

if [ $whoami != "root" ]; then
        echo
        echo "You must be root to run this program!"
        echo 
        exit 1
        
elif [ $pwd != "/var/spool/virtual" ]; then
        echo
        echo "You must be in the /var/spool/virtual folder to run this program."
        echo 
        exit 1
else

for i in $domainowners; do

        # Create Domain Folder
        echo $i | cut -f1 -d: > /tmp/domains.$$
        mkdir $(cat /tmp/domains.$$)
        
        # Chown Domain Folder
        echo $i | cut -f2 -d: > /tmp/users.$$
        chown $(cat /tmp/users.$$):$(cat /tmp/users.$$) $(cat /tmp/domains.$$)
done

fi
  
rm -rf /tmp/domains.$$ /tmp/users.$$
exit 0
 
nov virtual dir

thanks chatwizrd,

but I don't have a /virtual subdir in spool. if I make one en try to run the rebuild, it still says I need to be in the virtual subdir.
Why don't I have the virtual subdir?


is a new install according to http://help.directadmin.com/item.php?id=143 an idea?
thanks.
Ron.

New info: The outgoing mail leaves the server immediatly, so no hickups what so ever. just the local users stay in the queue for a long while. Anybody hints?

Ron.
 
Last edited:
If you are using dovecot then it shouldnt even be looking in /var/spool/virtual

Its weird because your error said:

Permission denied: failed to create directories for /var/spool/virtual/tbaplus.nl: Permission denied

Did you recently upgrade to dovecot?

If so did you follow this guide: http://www.directadmin.com/features.php?id=590

The ./build todovecot is very imporant.
 
solved

Thanks chatwizrd,

it is solved. I used http://help.directadmin.com/item.php?id=143 instead of your mentioned link. I thought I had the custombuild installed at first.
But after running that again it didn't solve. After running your link, it is solved.
And a lot of non delivered mail went thru also. thanks a bunch.

Ron.
 
You're right that it isn't supposed to be trying to write to /var/spool/virtual/ but it seems that using custombuild on a new install is missing something. I have been fighting this for an hour and finally used the manual instructions found here: http://help.directadmin.com/item.php?id=51

Did that and restarted both my dovecot and my exim and things are ok now. I would have used the customapache fix above but since it was a new install it asked me during the initial build whether I wanted customapache or custombuild. I chose custombuild so I don't even have a customapache folder.

Regardless the help file at http://help.directadmin.com/item.php?id=51 is the fix for the new woes. Now on to the next one.

BigWil
 
What should I do, to make my emails beeing sent immidiately instead waiting in Mail Queue Administration?

exim panic log
2008-06-27 23:01:09 queue run: process 31723 crashed with signal 11 while delivering 1KCKwu-0007gi-0e
2008-06-27 23:01:09 queue run: process 31725 crashed with signal 11 while delivering 1KCKKz-0002Sz-GF
2008-06-27 23:01:09 queue run: process 31727 crashed with signal 11 while delivering 1KCKYv-0002im-NG
2008-06-27 23:01:09 queue run: process 31728 crashed with signal 11 while delivering 1KCL0a-00088c-DF
2008-06-27 23:02:23 queue run: process 3026 crashed with signal 11 while delivering 1KCKKz-0002Sz-GF
2008-06-27 23:02:23 queue run: process 3028 crashed with signal 11 while delivering 1KCKYv-0002im-NG
2008-06-27 23:02:23 queue run: process 3029 crashed with signal 11 while delivering 1KCKwu-0007gi-0e
2008-06-27 23:02:23 queue run: process 3035 crashed with signal 11 while delivering 1KCL0a-00088c-DF
2008-06-27 23:17:23 queue run: process 5996 crashed with signal 11 while delivering 1KCL6g-0000xy-FK
2008-06-27 23:17:23 queue run: process 5997 crashed with signal 11 while delivering 1KCL0a-00088c-DF
2008-06-27 23:17:23 queue run: process 5998 crashed with signal 11 while delivering 1KCKKz-0002Sz-GF
2008-06-27 23:17:23 queue run: process 5999 crashed with signal 11 while delivering 1KCKYv-0002im-NG
2008-06-27 23:17:23 queue run: process 6000 crashed with signal 11 while delivering 1KCKwu-0007gi-0e

exim main log
2008-06-27 23:03:46 1KCL6g-0000xy-FK <= [email protected] H=mx10.go2.pl (poczta.o2.pl) [193.17.41.74] P=esmtp S=1391 [email protected] T="aaaa" from <[email protected]> for [email protected]
2008-06-27 23:17:23 queue run: process 5996 crashed with signal 11 while delivering 1KCL6g-0000xy-FK
2008-06-27 23:17:23 queue run: process 5997 crashed with signal 11 while delivering 1KCL0a-00088c-DF
2008-06-27 23:17:23 queue run: process 5998 crashed with signal 11 while delivering 1KCKKz-0002Sz-GF
2008-06-27 23:17:23 queue run: process 5999 crashed with signal 11 while delivering 1KCKYv-0002im-NG
2008-06-27 23:17:23 queue run: process 6000 crashed with signal 11 while delivering 1KCKwu-0007gi-0e



Apache 2.2.8 Running
DirectAdmin Running
Exim 4.67 Running
MySQL 5.0.51a Running
Named 9.4.2 Running
ProFTPd 1.3.1 Running
sshd Running
dovecot 1.0.14 Running


I solved... Problem is mail forward [email protected] -> [email protected]
How make this forward?
 
Last edited:
NO, no solved :/

2008-06-28 23:50:19 queue run: process 4391 crashed with signal 11 while delivering 1KCiBS-00010z-GV
2008-06-29 00:05:19 queue run: process 5458 crashed with signal 11 while delivering 1KCiBS-00010z-GV
2008-06-29 00:20:19 queue run: process 6545 crashed with signal 11 while delivering 1KCiBS-00010z-GV
2008-06-29 00:35:19 queue run: process 7439 crashed with signal 11 while delivering 1KCiBS-00010z-GV
2008-06-29 00:50:19 queue run: process 8320 crashed with signal 11 while delivering 1KCiBS-00010z-GV
2008-06-29 01:05:19 queue run: process 9335 crashed with signal 11 while delivering 1KCiBS-00010z-GV
Click to expand...

email about the size 8 mega of bytes doesn't want to come from 2 hours on the mailbox.


2008-06-29 08:05:19 queue run: process 1735 crashed with signal 11 while delivering 1KCiBS-00010z-GV
2008-06-29 08:05:19 queue run: process 1736 crashed with signal 11 while delivering 1KCjaD-0002Xm-Eu
2008-06-29 08:05:19 queue run: process 1737 crashed with signal 11 while delivering 1KCjbL-0002bH-EE
2008-06-29 08:20:19 queue run: process 2493 crashed with signal 11 while delivering 1KCiBS-00010z-GV
2008-06-29 08:20:19 queue run: process 2494 crashed with signal 11 while delivering 1KCjaD-0002Xm-Eu
2008-06-29 08:20:19 queue run: process 2495 crashed with signal 11 while delivering 1KCjbL-0002bH-EE
2008-06-29 08:35:19 queue run: process 3275 crashed with signal 11 while delivering 1KCiBS-00010z-GV
2008-06-29 08:35:19 queue run: process 3276 crashed with signal 11 while delivering 1KCjaD-0002Xm-Eu
2008-06-29 08:35:19 queue run: process 3277 crashed with signal 11 while delivering 1KCjbL-0002bH-EE
2008-06-29 08:50:19 queue run: process 4108 crashed with signal 11 while delivering 1KCiBS-00010z-GV
2008-06-29 08:50:19 queue run: process 4109 crashed with signal 11 while delivering 1KCjaD-0002Xm-Eu
2008-06-29 08:50:19 queue run: process 4110 crashed with signal 11 while delivering 1KCjbL-0002bH-EE
2008-06-29 09:05:19 queue run: process 5024 crashed with signal 11 while delivering 1KCiBS-00010z-GV
2008-06-29 09:05:19 queue run: process 5025 crashed with signal 11 while delivering 1KCjaD-0002Xm-Eu
2008-06-29 09:05:19 queue run: process 5026 crashed with signal 11 while delivering 1KCjbL-0002bH-EE
2008-06-29 09:20:19 queue run: process 5782 crashed with signal 11 while delivering 1KCiBS-00010z-GV
2008-06-29 09:20:19 queue run: process 5783 crashed with signal 11 while delivering 1KCjaD-0002Xm-Eu
2008-06-29 09:20:19 queue run: process 5784 crashed with signal 11 while delivering 1KCjbL-0002bH-EE
2008-06-29 09:35:19 queue run: process 6540 crashed with signal 11 while delivering 1KCiBS-00010z-GV
2008-06-29 09:35:19 queue run: process 6541 crashed with signal 11 while delivering 1KCjaD-0002Xm-Eu
2008-06-29 09:35:19 queue run: process 6542 crashed with signal 11 while delivering 1KCjbL-0002bH-EE
2008-06-29 09:50:19 queue run: process 7295 crashed with signal 11 while delivering 1KCiBS-00010z-GV
2008-06-29 09:50:19 queue run: process 7296 crashed with signal 11 while delivering 1KCjaD-0002Xm-Eu
2008-06-29 09:50:19 queue run: process 7297 crashed with signal 11 while delivering 1KCjbL-0002bH-EE
2008-06-29 10:05:19 queue run: process 8212 crashed with signal 11 while delivering 1KCiBS-00010z-GV
2008-06-29 10:05:19 queue run: process 8213 crashed with signal 11 while delivering 1KCjaD-0002Xm-Eu
2008-06-29 10:05:19 queue run: process 8214 crashed with signal 11 while delivering 1KCjbL-0002bH-EE
2008-06-29 10:20:19 queue run: process 8970 crashed with signal 11 while delivering 1KCiBS-00010z-GV
2008-06-29 10:20:19 queue run: process 8971 crashed with signal 11 while delivering 1KCjaD-0002Xm-Eu
2008-06-29 10:20:19 queue run: process 8972 crashed with signal 11 while delivering 1KCjbL-0002bH-EE
2008-06-29 10:35:19 queue run: process 9726 crashed with signal 11 while delivering 1KCiBS-00010z-GV
2008-06-29 10:35:19 queue run: process 9727 crashed with signal 11 while delivering 1KCjaD-0002Xm-Eu
2008-06-29 10:35:19 queue run: process 9728 crashed with signal 11 while delivering 1KCjbL-0002bH-EE
2008-06-29 10:50:19 queue run: process 10481 crashed with signal 11 while delivering 1KCiBS-00010z-GV
2008-06-29 10:50:19 queue run: process 10482 crashed with signal 11 while delivering 1KCjaD-0002Xm-Eu
2008-06-29 10:50:19 queue run: process 10483 crashed with signal 11 while delivering 1KCjbL-0002bH-EE
2008-06-29 11:05:19 queue run: process 11398 crashed with signal 11 while delivering 1KCiBS-00010z-GV
2008-06-29 11:05:19 queue run: process 11399 crashed with signal 11 while delivering 1KCjaD-0002Xm-Eu
2008-06-29 11:05:19 queue run: process 11400 crashed with signal 11 while delivering 1KCjbL-0002bH-EE
2008-06-29 11:20:19 queue run: process 12157 crashed with signal 11 while delivering 1KCiBS-00010z-GV
2008-06-29 11:20:19 queue run: process 12158 crashed with signal 11 while delivering 1KCjaD-0002Xm-Eu
2008-06-29 11:20:19 queue run: process 12159 crashed with signal 11 while delivering 1KCjbL-0002bH-EE
2008-06-29 11:35:19 queue run: process 12976 crashed with signal 11 while delivering 1KCiBS-00010z-GV
2008-06-29 11:35:19 queue run: process 12977 crashed with signal 11 while delivering 1KCjaD-0002Xm-Eu
2008-06-29 11:35:19 queue run: process 12978 crashed with signal 11 while delivering 1KCjbL-0002bH-EE
2008-06-29 11:50:19 queue run: process 13801 crashed with signal 11 while delivering 1KCiBS-00010z-GV
2008-06-29 11:50:19 queue run: process 13802 crashed with signal 11 while delivering 1KCjaD-0002Xm-Eu
2008-06-29 11:50:19 queue run: process 13803 crashed with signal 11 while delivering 1KCjbL-0002bH-EE
2008-06-29 12:05:19 queue run: process 14792 crashed with signal 11 while delivering 1KCiBS-00010z-GV
2008-06-29 12:05:19 queue run: process 14793 crashed with signal 11 while delivering 1KCjaD-0002Xm-Eu
2008-06-29 12:05:19 queue run: process 14794 crashed with signal 11 while delivering 1KCjbL-0002bH-EE
2008-06-29 12:20:19 queue run: process 15610 crashed with signal 11 while delivering 1KCiBS-00010z-GV
2008-06-29 12:20:19 queue run: process 15611 crashed with signal 11 while delivering 1KCjaD-0002Xm-Eu
2008-06-29 12:20:19 queue run: process 15612 crashed with signal 11 while delivering 1KCjbL-0002bH-EE
2008-06-29 12:35:19 queue run: process 16434 crashed with signal 11 while delivering 1KCiBS-00010z-GV
2008-06-29 12:35:19 queue run: process 16435 crashed with signal 11 while delivering 1KCjaD-0002Xm-Eu
2008-06-29 12:35:19 queue run: process 16436 crashed with signal 11 while delivering 1KCjbL-0002bH-EE
2008-06-29 12:50:19 queue run: process 17252 crashed with signal 11 while delivering 1KCiBS-00010z-GV
2008-06-29 12:50:19 queue run: process 17253 crashed with signal 11 while delivering 1KCjaD-0002Xm-Eu
2008-06-29 12:50:19 queue run: process 17254 crashed with signal 11 while delivering 1KCjbL-0002bH-EE
2008-06-29 13:05:19 queue run: process 18232 crashed with signal 11 while delivering 1KCiBS-00010z-GV
2008-06-29 13:05:19 queue run: process 18233 crashed with signal 11 while delivering 1KCjaD-0002Xm-Eu
2008-06-29 13:05:19 queue run: process 18234 crashed with signal 11 while delivering 1KCjbL-0002bH-EE
2008-06-29 13:20:19 queue run: process 19125 crashed with signal 11 while delivering 1KCiBS-00010z-GV
2008-06-29 13:20:19 queue run: process 19126 crashed with signal 11 while delivering 1KCjaD-0002Xm-Eu
2008-06-29 13:20:19 queue run: process 19127 crashed with signal 11 while delivering 1KCjbL-0002bH-EE
2008-06-29 13:35:19 queue run: process 19984 crashed with signal 11 while delivering 1KCiBS-00010z-GV
2008-06-29 13:35:19 queue run: process 19985 crashed with signal 11 while delivering 1KCjaD-0002Xm-Eu
2008-06-29 13:35:19 queue run: process 19986 crashed with signal 11 while delivering 1KCjbL-0002bH-EE
2008-06-29 13:50:19 queue run: process 20856 crashed with signal 11 while delivering 1KCiBS-00010z-GV
2008-06-29 13:50:19 queue run: process 20857 crashed with signal 11 while delivering 1KCjaD-0002Xm-Eu
2008-06-29 13:50:19 queue run: process 20858 crashed with signal 11 while delivering 1KCjbL-0002bH-EE
Click to expand...

14 hours
 
Last edited:
The queue run is crashing with signal 11 (but you probably knew that). You might want to google for that error (without the parts that change each time). When i did that one of the pages I found was this one; look for Q0602.
I'm not sure what you mean (your first post in this thread) by switch to exim, as DirectAdmin never uses anything else except exim.

If you had DirectAdmin staff perform your DirectAdmin install and you haven't made any changes to the configuration since you might want to check with DirectAdmin support here. If you installed it yourself and haven't made any changes to the configuration as set by DirectAdmin, also check with them. If your server came with DirectAdmin installed, check with the company from where you got the server to see what they did, as they're responsible for DirectAdmin support on your server. If you made changes, try undoing them, follow the instructions in the Exim FaQ quoted above.

Jeff

Jeff
 
Regarding exim segfaults, we're not completely sure what the issue is.
We've compiled a list of things we think may be solutions, but they're all just guesses you can try.

The first thing to try is a full recompile of exim for your system:
Rpm based system: http://help.directadmin.com/item.php?id=126
FreeBSD/Debian: http://help.directadmin.com/item.php?id=125

Past that, this is the list of things we've tried which some have reported to work:
http://help.directadmin.com/item.php?id=114

Also, if you update your eximl.conf and are using dovecot, make *sure* you re-patch it for dovecot, or you'll get /var/spool/virtual errors, which are for vm-pop3d, not dovecot.
http://help.directadmin.com/item.php?id=51

John
 
DirectAdmin Support said:
FreeBSD/Debian: http://help.directadmin.com/item.php?id=125
Click to expand...

>>> exicyclog script built
>>> exinext script built
>>> exiwhat script built
>>> exigrep script built
>>> eximstats script built
>>> exipick script built
>>> exiqgrep script built
>>> exiqsumm script built
>>> transport-filter.pl script built
>>> convert4r3 script built
>>> convert4r4 script built
>>> exim_checkaccess script built

gcc exim_dbmbuild.c
In file included from exim.h:433,
from exim_dbmbuild.c:33:
dbstuff.h:103:16: error: db.h: No such file or directory
In file included from exim.h:433,
from exim_dbmbuild.c:33:
dbstuff.h:529: błąd: expected specifier-qualifier-list before `DB,
exim_dbmbuild.c: W funkcji `main,:
exim_dbmbuild.c:150: błąd: `DB, undeclared (first use in this function)
exim_dbmbuild.c:150: błąd: (Each undeclared identifier is reported only once
exim_dbmbuild.c:150: błąd: for each function it appears in.)
exim_dbmbuild.c:150: błąd: `d, undeclared (first use in this function)
exim_dbmbuild.c:151: błąd: `DBT, undeclared (first use in this function)
exim_dbmbuild.c:151: błąd: expected `;, before `key,
exim_dbmbuild.c:213: błąd: `DB_HASH, undeclared (first use in this function)
exim_dbmbuild.c:295: błąd: `content, undeclared (first use in this function)
exim_dbmbuild.c:298: błąd: `key, undeclared (first use in this function)
exim_dbmbuild.c:298: błąd: `R_NOOVERWRITE, undeclared (first use in this function)
make[1]: *** [exim_dbmbuild.o] Błąd 1
make[1]: Opuszczenie katalogu `/tmp/exim-4.69/build-Linux-i386'
make: *** [go] Błąd 2
Click to expand...

Błąd - błąd -> error
Opuszczenie katalogu -> exit directory
 
Hello,
Code: 
dbstuff.h:103:16: error: db.h: No such file or directory

You're mising db4-devel (what it's called on a rpm system)

On our debian 3.1 box it's called: libdb4.3-dev

On freebsd, I've never not seen that error.. but the package would again be similar. db4 of somesort.

John
 
Code: 
[............]
DynaLoader.c:(.text+0x7af): undefined reference to `Perl_sv_2pv_flags'
/usr/lib/perl/5.8/auto/DynaLoader/DynaLoader.a(DynaLoader.o): In function `XS_DynaLoader_dl_find_symbol':
DynaLoader.c:(.text+0x841): undefined reference to `Perl_sv_newmortal'
DynaLoader.c:(.text+0x86a): undefined reference to `Perl_sv_setiv'
DynaLoader.c:(.text+0x88b): undefined reference to `Perl_sv_2iv'
DynaLoader.c:(.text+0x8ca): undefined reference to `Perl_sv_2pv_flags'
DynaLoader.c:(.text+0x907): undefined reference to `Perl_croak'
/usr/lib/perl/5.8/auto/DynaLoader/DynaLoader.a(DynaLoader.o): In function `XS_DynaLoader_dl_unload_file':
DynaLoader.c:(.text+0x9aa): undefined reference to `Perl_sv_setiv'
DynaLoader.c:(.text+0x9bc): undefined reference to `Perl_mg_set'
DynaLoader.c:(.text+0x9f9): undefined reference to `Perl_sv_newmortal'
DynaLoader.c:(.text+0xa0d): undefined reference to `Perl_sv_2iv'
DynaLoader.c:(.text+0xa27): undefined reference to `Perl_croak'
/usr/lib/perl/5.8/auto/DynaLoader/DynaLoader.a(DynaLoader.o): In function `XS_DynaLoader_dl_load_file':
DynaLoader.c:(.text+0xadf): undefined reference to `Perl_hv_fetch'
DynaLoader.c:(.text+0xb1d): undefined reference to `Perl_sv_newmortal'
DynaLoader.c:(.text+0xb43): undefined reference to `Perl_sv_setiv'
DynaLoader.c:(.text+0xb72): undefined reference to `Perl_sv_2uv'
DynaLoader.c:(.text+0xb9a): undefined reference to `Perl_sv_2pv_flags'
DynaLoader.c:(.text+0xbb1): undefined reference to `Perl_sv_2iv'
DynaLoader.c:(.text+0xbf4): undefined reference to `Perl_croak'
collect2: ld returned 1 exit status
 
I'm having another problem here.
The mails stay in the queue and are never sent (I've waited days and nothing).
If I go to the Queue Administration and set them to retry, they are sent without problems.

I checked exim logs and no error appears, but the mail is not sent:

Code: 
2009-04-16 18:13:01 1LuZpN-0002PD-8A <= [email protected] U=apache P=local S=544 T="test subject" from <[email protected]> for [email protected]

I changed the information on purpose for privacy matters.
The emails are being sent from a simple ad hoc PHP, using the mail() function.

Any ideas on how to debug this?

I'm running Exim 4.67, on a Centos 5.2 with DA, also running ClamAV, AVG, SpamAssasin and MailScanner.
 
If you can resend them manually without a problem your main running exim process may not be starting queue-runners.

If you don't know how to check for this then post the output of this command:
$ps waux | grep exim
Click to expand...
Jeff
 
Code: 
ps waux |grep exim
mail     18030  0.0  0.3   8772  1080 ?        Ss   Apr16   0:02 /usr/sbin/exim -bd -C /etc/exim_outgoing.conf -q15m -oP /var/run/exim.pid
root     26217  0.0  1.1  10304  3724 ?        S    15:42   0:00 /usr/sbin/exim -C /etc/exim_outgoing.conf -Mc 1Lutwo-0006ix-8O
mail     26218  0.0  0.4  10304  1632 ?        S    15:42   0:00 /usr/sbin/exim -C /etc/exim_outgoing.conf -Mc 1Lutwo-0006ix-8O
root     26313  0.0  1.1  10308  3724 ?        S    15:42   0:00 /usr/sbin/exim -C /etc/exim_outgoing.conf -Mc 1Lutwu-0006qD-S6
mail     26338  0.0  0.5  10308  1696 ?        S    15:42   0:00 /usr/sbin/exim -C /etc/exim_outgoing.conf -Mc 1Lutwu-0006qD-S6
mail     29897  0.0  0.4   8804  1452 ?        S    15:44   0:00 /usr/sbin/exim -bd -C /etc/exim_outgoing.conf -q15m -oP /var/run/exim.pid
root     29903  0.0  0.1   2940   616 pts/0    D+   15:44   0:00 grep exim

Is that ok? What else should be running?
 
You must log in or register to reply here.
Back
Top