make: *** [ext/fileinfo/libmagic/apprentice.lo] Error 1 When trying to install

sandrift

Verified User
Joined
Aug 11, 2005
Messages
15
Decided to reinstall my VPS tonight. I've done MANY Direct Admin installs. Never a problem.
After backing up, I reimaged my vps to CentOS 7 and did the usual for install.

Install gets all the way to here:
"
.c -o ext/fileinfo/libmagic/apprentice.lo
virtual memory exhausted: Cannot allocate memory
make: *** [ext/fileinfo/libmagic/apprentice.lo] Error 1
Changed secure_php option from no to yes
PHP has been secured.
Job for httpd.service failed because the control process exited with error code. See "systemctl status httpd.service" and "journalctl -xe" for details.

"
And then quits.
I can assure you, Virtual Memory is not exhausted. Have 512 mb virtual memory, only about 50 mb was in use, only about 100 out of the 256 mb ram was in use.
Tried again, instead of auto, did the regular install. Same result. Re-Imaged the VPS again, same result. Went down a version, back to CentOS 6, which is what the VPS was on before I re-installed. Same exact result.
I'd try CentOS 8 but my provider does not offer that yet.


The error log it said to see has the following:

[root@pbji0s41ho var]# systemctl status httpd.service
● httpd.service - The Apache HTTP Server
Loaded: loaded (/etc/systemd/system/httpd.service; enabled; vendor preset: disabled)
Active: failed (Result: exit-code) since Sun 2020-02-09 10:02:09 CET; 8min ago
Process: 30467 ExecStop=/bin/kill -WINCH ${MAINPID} (code=exited, status=1/FAILURE)
Process: 30466 ExecStart=/usr/sbin/httpd $OPTIONS -DFOREGROUND (code=exited, status=1/FAILURE)
Main PID: 30466 (code=exited, status=1/FAILURE)

Feb 09 10:02:09 offsite.globaldc.com systemd[1]: Starting The Apache HTTP Server...
Feb 09 10:02:09 offsite.globaldc.com httpd[30466]: httpd: Syntax error on line 213 of /etc/httpd/conf/httpd.conf: Syntax error on line 23 of /etc/httpd/conf/extra... directory
Feb 09 10:02:09 offsite.globaldc.com systemd[1]: httpd.service: main process exited, code=exited, status=1/FAILURE
Feb 09 10:02:09 offsite.globaldc.com kill[30467]: kill: cannot find process ""
Feb 09 10:02:09 offsite.globaldc.com systemd[1]: httpd.service: control process exited, code=exited status=1
Feb 09 10:02:09 offsite.globaldc.com systemd[1]: Failed to start The Apache HTTP Server.
Feb 09 10:02:09 offsite.globaldc.com systemd[1]: Unit httpd.service entered failed state.
Feb 09 10:02:09 offsite.globaldc.com systemd[1]: httpd.service failed.
Hint: Some lines were ellipsized, use -l to show in full.
[root@pbji0s41ho var]#
"



And the Journal one:
"
[root@pbji0s41ho var]# journalctl -xe
Feb 09 10:10:30 offsite.globaldc.com sshd[31113]: Disconnected from 179.215.136.238 port 45881 [preauth]
Feb 09 10:10:41 offsite.globaldc.com kernel: Firewall: *TCP_IN Blocked* IN=venet0 OUT= MAC= SRC=71.6.233.160 DST=185.137.14.161 LEN=40 TOS=0x00 PREC=0x00 TTL=239 ID=54321 PROT
Feb 09 10:10:46 offsite.globaldc.com kernel: Firewall: *TCP_IN Blocked* IN=venet0 OUT= MAC= SRC=80.82.70.33 DST=185.137.14.161 LEN=40 TOS=0x00 PREC=0x00 TTL=252 ID=17750 PROTO
Feb 09 10:11:01 offsite.globaldc.com systemd[1]: Started Session 15188524 of user root.
-- Subject: Unit session-15188524.scope has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit session-15188524.scope has finished starting up.
--
-- The start-up result is done.
Feb 09 10:11:01 offsite.globaldc.com CROND[31119]: (root) CMD (/usr/local/directadmin/dataskq)
Feb 09 10:11:01 offsite.globaldc.com CROND[31118]: (root) CMDOUT (Unable to read config file. Check the file permissions)
Feb 09 10:11:01 offsite.globaldc.com CROND[31118]: (root) CMDOUT (Unable to read config file. Check to make sure that /usr/local/directadmin/conf/directadmin.conf.lock doesn't
Feb 09 10:11:04 offsite.globaldc.com sshd[31120]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=222.186.30.248 user=root
Feb 09 10:11:07 offsite.globaldc.com sshd[31120]: Failed password for root from 222.186.30.248 port 37082 ssh2
Feb 09 10:11:09 offsite.globaldc.com sshd[31120]: Failed password for root from 222.186.30.248 port 37082 ssh2
Feb 09 10:11:11 offsite.globaldc.com sshd[31120]: Failed password for root from 222.186.30.248 port 37082 ssh2
Feb 09 10:11:11 offsite.globaldc.com sshd[31120]: Received disconnect from 222.186.30.248 port 37082:11: [preauth]
Feb 09 10:11:11 offsite.globaldc.com sshd[31120]: Disconnected from 222.186.30.248 port 37082 [preauth]
Feb 09 10:11:11 offsite.globaldc.com sshd[31120]: PAM 2 more authentication failures; logname= uid=0 euid=0 tty=ssh ruser= rhost=222.186.30.248 user=root
Feb 09 10:11:16 offsite.globaldc.com kernel: Firewall: *TCP_IN Blocked* IN=venet0 OUT= MAC= SRC=89.248.162.136 DST=185.137.14.161 LEN=40 TOS=0x00 PREC=0x00 TTL=252 ID=63847 PR
Feb 09 10:11:27 offsite.globaldc.com kernel: Firewall: *TCP_IN Blocked* IN=venet0 OUT= MAC= SRC=92.118.37.86 DST=185.137.14.161 LEN=40 TOS=0x00 PREC=0x00 TTL=252 ID=62895 PROT
Feb 09 10:11:35 offsite.globaldc.com kernel: Firewall: *TCP_IN Blocked* IN=venet0 OUT= MAC= SRC=185.143.223.81 DST=185.137.14.161 LEN=40 TOS=0x00 PREC=0x00 TTL=250 ID=44897 PR
Feb 09 10:11:47 offsite.globaldc.com kernel: Firewall: *TCP_IN Blocked* IN=venet0 OUT= MAC= SRC=80.82.77.243 DST=185.137.14.161 LEN=40 TOS=0x00 PREC=0x00 TTL=252 ID=61096 PROT
Feb 09 10:11:49 offsite.globaldc.com kernel: Firewall: *TCP_IN Blocked* IN=venet0 OUT= MAC= SRC=185.137.26.18 DST=185.137.14.161 LEN=40 TOS=0x00 PREC=0x00 TTL=244 ID=16385 DF
Feb 09 10:12:01 offsite.globaldc.com systemd[1]: Started Session 15188537 of user root.
-- Subject: Unit session-15188537.scope has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit session-15188537.scope has finished starting up.
--
-- The start-up result is done.
Feb 09 10:12:01 offsite.globaldc.com CROND[31126]: (root) CMD (/usr/local/directadmin/dataskq)
Feb 09 10:12:01 offsite.globaldc.com CROND[31125]: (root) CMDOUT (Unable to read config file. Check the file permissions)
Feb 09 10:12:01 offsite.globaldc.com CROND[31125]: (root) CMDOUT (Unable to read config file. Check to make sure that /usr/local/directadmin/conf/directadmin.conf.lock doesn't
Feb 09 10:12:02 offsite.globaldc.com sshd[31123]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=222.186.190.92 user=root
Feb 09 10:12:03 offsite.globaldc.com sshd[31123]: Failed password for root from 222.186.190.92 port 26874 ssh2
Feb 09 10:12:06 offsite.globaldc.com sshd[31123]: Failed password for root from 222.186.190.92 port 26874 ssh2
Feb 09 10:12:09 offsite.globaldc.com sshd[31123]: Failed password for root from 222.186.190.92 port 26874 ssh2
Feb 09 10:12:13 offsite.globaldc.com sshd[31123]: Failed password for root from 222.186.190.92 port 26874 ssh2
Feb 09 10:12:16 offsite.globaldc.com sshd[31123]: Failed password for root from 222.186.190.92 port 26874 ssh2
Feb 09 10:12:16 offsite.globaldc.com sshd[31123]: error: maximum authentication attempts exceeded for root from 222.186.190.92 port 26874 ssh2 [preauth]
Feb 09 10:12:16 offsite.globaldc.com sshd[31123]: Disconnecting: Too many authentication failures [preauth]
Feb 09 10:12:16 offsite.globaldc.com sshd[31123]: PAM 4 more authentication failures; logname= uid=0 euid=0 tty=ssh ruser= rhost=222.186.190.92 user=root
Feb 09 10:12:16 offsite.globaldc.com sshd[31123]: PAM service(sshd) ignoring max retries; 5 > 3
Feb 09 10:12:18 offsite.globaldc.com kernel: Firewall: *TCP_IN Blocked* IN=venet0 OUT= MAC= SRC=80.82.77.243 DST=185.137.14.161 LEN=40 TOS=0x00 PREC=0x00 TTL=252 ID=64383 PROT
Feb 09 10:12:22 offsite.globaldc.com kernel: Firewall: *TCP_IN Blocked* IN=venet0 OUT= MAC= SRC=92.118.37.86 DST=185.137.14.161 LEN=40 TOS=0x00 PREC=0x00 TTL=252 ID=15145 PROT
lines 1333-1381/1381 (END)
"




What should have been a 2-hour start to finish project is going on 8 hours of screwing around. Does anyone have any ideas on how I can get DA installed and my sites back up and running?

THANK YOU!
 

ditto

Verified User
Joined
Apr 27, 2009
Messages
2,557
I know you said that not all memory was used, but still think that is your problem. 256 MB RAM is not much. Please see https://directadmin.com/install.php where it says: "minimum 1 GB of memory is required", and "at least 2 GB of swap memory".

Also please note that for CentOS 8 you need minimum 2 GB of memory, but 4 GB preferred: https://wiki.centos.org/Manuals/ReleaseNotes/CentOS8.1905#Install_Media

At least 2 GB RAM are required to install and use CentOS-8 (1905). At least 4 GB RAM is recommended.
 

sandrift

Verified User
Joined
Aug 11, 2005
Messages
15
I'm attempting to run CentOS 6 ad CentOS 7. It was a working functional server with DA until I reinstalled. I'm attempting to get a temporary ram upgrade until I get it installed again, and will give that a try. Hopefully, it works. The company I have my VPS with discontinued VPS services, but kept the legacy customers, and doesn't do upgrades on accounts anymore. I am moving to a dedicated or colo server hopefully around May. So I just need this to hold out until then.
 

sandrift

Verified User
Joined
Aug 11, 2005
Messages
15
Made "Some" progress. Did another clean CentOS 6 install.


Got this far;
make: *** [ext/fileinfo/libmagic/apprentice.lo] Error 1
Stopping crond: [ OK ]
Starting crond: [ OK ]
Changed secure_php option from no to yes
PHP has been secured.
httpd: Syntax error on line 213 of /etc/httpd/conf/httpd.conf: Syntax error on line 23 of /etc/httpd/conf/extra/httpd-vhosts.conf: Could not open configuration file /etc/httpd/conf/ips.conf: No such file or directory
[root@pbji0s41ho ~]#



And thats where it quit this time. This isn't making any sense :-(

No swap or memory issues this time.
 
Top