[tools] update.script

Do you like use update.script ?

  • yes, all time

    Votes: 221 69.1%

  • no, some time

    Votes: 44 13.8%

  • some time

    Votes: 55 17.2%
  • Total voters
    320
Hi,

I use debian etch and installed modsec 2.x some time ago. Today I updated it and the rule sets (I changed the script to bypass the distro and md5 check).

When checking the config I get these errors:

Syntax error on line 38 of /etc/modsecurity2/base_rules/modsecurity_crs_21_protocol_anomalies.conf:
ModSecurity: SkipAfter actions can only be specified by chain starter rules.

Syntax error on line 25 of /etc/modsecurity2/base_rules/modsecurity_crs_60_correlation.conf:
ModSecurity: SkipAfter actions can only be specified by chain starter rules.

Syntax error on line 31 of /etc/modsecurity2/base_rules/modsecurity_crs_60_correlation.conf:
ModSecurity: SkipAfter actions can only be specified by chain starter rules.

I now commented out these lines, but is there any way to fix this?

Thanks
 
Hi weal,

Im trying to install mod_clamav on a clean centos 5.5 x64 install but im getting this error:

Starting httpd: httpd: Syntax error on line 19 of /etc/httpd/conf/httpd.conf: Cannot load /usr/lib/apache/mod_clamav.so into server: libclamav.so.6: cannot open shared object file: No such file or directory

Anyway to solv this. I already tried ldconfig, but this didnt help.
 
xsxn said:
Hi weal,

Im trying to install mod_clamav on a clean centos 5.5 x64 install but im getting this error:

Starting httpd: httpd: Syntax error on line 19 of /etc/httpd/conf/httpd.conf: Cannot load /usr/lib/apache/mod_clamav.so into server: libclamav.so.6: cannot open shared object file: No such file or directory

Anyway to solv this. I already tried ldconfig, but this didnt help.
Click to expand...

if you want me to install it send server info by pm.

Wael
 
Cannot find autoconf. Please check your autoconf installation and the

you have to install autoconf

on debian apt-get install autoconf

on centos should be yum install autoconf (but im not sure cause im not expert on centos).

Regards
 
@how@ said:
New MOD_antiloris

Wael
Click to expand...
Not Found

The requested URL /mod_antiloris-0.4.tar.bz2 was not found on this server.

Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.
 
Hey wael.. ive update your script today and.. surprise.. doesnt work anymore on debian?

>./update.script UPDATEME



##################################################################
#
# Update.Script did not support your OS, Sorry
#
##################################################################


damn.. was so usefull for update clamav...

Should i ask you why did you took that decision?

Regards
 
OpenSSL Update Broken

Can't update OpenSSL:

./update.script OPENSSL
Resolving anga.funkfeuer.at... 78.41.115.130, 2a02:60:1:1::9
Connecting to anga.funkfeuer.at|78.41.115.130|:80... failed: No route to host.
Connecting to anga.funkfeuer.at|2a02:60:1:1::9|:80... failed: Network is unreachable.
md5sum: /usr/local/updatescript/openssh-5.6p1.tar.gz: No such file or directory
MD5 invalid. Aborting.
 
nimafire said:
hello. today i try to install eAccelerator. so run ./update.script EACCELERATOR and then it ask me cli or cgi. becasue we run suphp so select ./update.script EACCELERATOR2 but iys my output:


[root@serv updatescript]# ./update.script EACCELERATOR



##################################################################
#
# If you use PHP CGI run
# ./update.script EACCELERATOR2
# If you use PHP CLI run
# ./update.script EACCELERATOR1
#
##################################################################


[root@serv updatescript]#
[root@serv updatescript]# ./update.script EACCELERATOR2

Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
Traceback (most recent call last):
File "/usr/bin/yum", line 29, in ?
yummain.user_main(sys.argv[1:], exit_code=True)
File "/usr/share/yum-cli/yummain.py", line 309, in user_main
errcode = main(args)
File "/usr/share/yum-cli/yummain.py", line 178, in main
result, resultmsgs = base.doCommands()
File "/usr/share/yum-cli/cli.py", line 345, in doCommands
self._getTs(needTsRemove)
File "/usr/lib/python2.4/site-packages/yum/depsolve.py", line 101, in _getTs
self._getTsInfo(remove_only)
File "/usr/lib/python2.4/site-packages/yum/depsolve.py", line 112, in _getTsInfo
pkgSack = self.pkgSack
File "/usr/lib/python2.4/site-packages/yum/__init__.py", line 661, in <lambda>
pkgSack = property(fget=lambda self: self._getSacks(),
File "/usr/lib/python2.4/site-packages/yum/__init__.py", line 501, in _getSacks
self.repos.populateSack(which=repos)
File "/usr/lib/python2.4/site-packages/yum/repos.py", line 232, in populateSack
self.doSetup()
File "/usr/lib/python2.4/site-packages/yum/repos.py", line 79, in doSetup
self.ayum.plugins.run('postreposetup')
File "/usr/lib/python2.4/site-packages/yum/plugins.py", line 179, in run
func(conduitcls(self, self.base, conf, **kwargs))
File "/usr/lib/yum-plugins/fastestmirror.py", line 181, in postreposetup_hook
all_urls = FastestMirror(all_urls).get_mirrorlist()
File "/usr/lib/yum-plugins/fastestmirror.py", line 333, in get_mirrorlist
self._poll_mirrors()
File "/usr/lib/yum-plugins/fastestmirror.py", line 376, in _poll_mirrors
pollThread.start()
File "/usr/lib/python2.4/threading.py", line 416, in start
_start_new_thread(self.__bootstrap, ())
thread.error: can't start new thread

--2010-11-21 22:04:32-- http://els.web4host.net/eaccelerator/eaccelerator-0.9.6.1.tar.bz2
Resolving els.web4host.net... 173.212.207.52
Connecting to els.web4host.net|173.212.207.52|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 106049 (104K) [application/x-bzip2]
Saving to: `eaccelerator-0.9.6.1.tar.bz2'

100%[======================================>] 106,049 372K/s in 0.3s

2010-11-21 22:04:33 (372 KB/s) - `eaccelerator-0.9.6.1.tar.bz2' saved [106049/106049]

MD5 valid.
eaccelerator-0.9.6.1/
eaccelerator-0.9.6.1/COPYING
eaccelerator-0.9.6.1/mm.h
eaccelerator-0.9.6.1/control.php
eaccelerator-0.9.6.1/AUTHORS
eaccelerator-0.9.6.1/doc/
eaccelerator-0.9.6.1/doc/php/
eaccelerator-0.9.6.1/doc/php/dasm.php
eaccelerator-0.9.6.1/doc/php/info.php
eaccelerator-0.9.6.1/doc/phpdoc.ini
eaccelerator-0.9.6.1/eaccelerator.c
eaccelerator-0.9.6.1/config.w32
eaccelerator-0.9.6.1/opcodes.c
eaccelerator-0.9.6.1/dasm.php
eaccelerator-0.9.6.1/eaccelerator.h
eaccelerator-0.9.6.1/ea_dasm.c
eaccelerator-0.9.6.1/NEWS
eaccelerator-0.9.6.1/mm.c
eaccelerator-0.9.6.1/ea_store.c
eaccelerator-0.9.6.1/eaccelerator.ini
eaccelerator-0.9.6.1/config.m4
eaccelerator-0.9.6.1/ea_restore.c
eaccelerator-0.9.6.1/debug.h
eaccelerator-0.9.6.1/bugreport.php
eaccelerator-0.9.6.1/ea_dasm.h
eaccelerator-0.9.6.1/README.win32
eaccelerator-0.9.6.1/opcodes.h
eaccelerator-0.9.6.1/ea_store.h
eaccelerator-0.9.6.1/ChangeLog
eaccelerator-0.9.6.1/fnmatch.h
eaccelerator-0.9.6.1/eaccelerator_version.h
eaccelerator-0.9.6.1/fnmatch.c
eaccelerator-0.9.6.1/Makefile.in
eaccelerator-0.9.6.1/ea_info.h
eaccelerator-0.9.6.1/.gitignore
eaccelerator-0.9.6.1/optimize.c
eaccelerator-0.9.6.1/debug.c
eaccelerator-0.9.6.1/PHP_Highlight.php
eaccelerator-0.9.6.1/ea_info.c
eaccelerator-0.9.6.1/win32/
eaccelerator-0.9.6.1/win32/eAccelerator.sln
eaccelerator-0.9.6.1/win32/eAccelerator.dsp
eaccelerator-0.9.6.1/win32/eAccelerator.vcproj
eaccelerator-0.9.6.1/win32/eAccelerator.dsw
eaccelerator-0.9.6.1/README
eaccelerator-0.9.6.1/ea_restore.h
Configuring for:
PHP Api Version: 20041225
Zend Module Api No: 20060613
Zend Extension Api No: 220060519
Cannot find autoconf. Please check your autoconf installation and the
$PHP_AUTOCONF environment variable. Then, rerun this script.

./update.script: line 1180: ./configure: No such file or directory
make: *** No targets specified and no makefile found. Stop.
make: *** No rule to make target `install'. Stop.
eAccelerator install/update done
Click to expand...

yum problem, try to killall yum then install eaccelerator again.

Wael
 
transmobius said:
Can't update OpenSSL:

./update.script OPENSSL
Resolving anga.funkfeuer.at... 78.41.115.130, 2a02:60:1:1::9
Connecting to anga.funkfeuer.at|78.41.115.130|:80... failed: No route to host.
Connecting to anga.funkfeuer.at|2a02:60:1:1::9|:80... failed: Network is unreachable.
md5sum: /usr/local/updatescript/openssh-5.6p1.tar.gz: No such file or directory
MD5 invalid. Aborting.
Click to expand...

openssl or openssh ??
note: my script work fine with openssl and openssh too :)

Wael
 
SeLLeRoNe said:
Hey wael.. ive update your script today and.. surprise.. doesnt work anymore on debian?

>./update.script UPDATEME



##################################################################
#
# Update.Script did not support your OS, Sorry
#
##################################################################


damn.. was so usefull for update clamav...

Should i ask you why did you took that decision?

Regards
Click to expand...

try to use old ver.
ill send pm now.

Wael
 
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hello, ProFTPD community. The ProFTPD Project team is pleased to
announce that the first release candidate for ProFTPD 1.3.4 is now
available for public consumption.

You can download 1.3.4rc1, including PGP signatures and MD5 sums,
from any of the proftpd mirrors. Mirrors are available via FTP as:

ftp.<two_letter_iso_country_code>.proftpd.org

(example: ftp.nl.proftpd.org). Not all countries have mirrors; however
you should select one that is geographically close to you.

Alternatively, you can download proftpd from the main site:

ftp://ftp.proftpd.org/distrib/source

RPMs, once available, will be placed here:

ftp://ftp.proftpd.org/distrib/packages/RPMS

The 1.3.4rc1 release includes major new features and numerous bugfixes,
including:

+ New modules: mod_copy, mod_deflate, mod_qos
+ New Japanese translation
+ Many mod_sftp bugfixes

Please read the included NEWS, RELEASE_NOTES, and ChangeLog files for
the full details.

The MD5 sums for the source tarballs are:

3472f7a8fb760f549daf485642277024 proftpd-1.3.4rc1.tar.bz2
a60891f0700f617c1e5d7317bd3396dc proftpd-1.3.4rc1.tar.gz

The PGP signatures for the source tarballs are:

proftpd-1.3.4rc1.tar.bz2:

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)

iEYEABECAAYFAk0MAe0ACgkQt46JP6URl2pbsgCg1686DNlQ2m2eMnZmnnTEZTiJ
U7cAoNFCfDtM7ic1SEXfusSsOupf3EuX
=c6tJ
-----END PGP SIGNATURE-----

proftpd-1.3.4rc1.tar.gz:

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)

iEYEABECAAYFAk0MAfMACgkQt46JP6URl2qwuQCg6mr1KfkypmMYZ7LiAWdO46u2
C3oAoLFH+5fV4NuqabDcvGJLiHl1Xyv4
=wj2N
-----END PGP SIGNATURE-----

My PGP key has been used to sign the source tarballs as well as this
announcement; it is available via MIT's public keyserver.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)

iEYEARECAAYFAk0MAm0ACgkQt46JP6URl2ozJgCeKDi4v+ez8ETpv+PtlVlP3IKT
3M4AoPSgwvdjNKBUAYIXVD5N/8PK1UKX
=yRPL
-----END PGP SIGNATURE-----


------------------------------------------------------------------------------
Lotusphere 2011
Register now for Lotusphere 2011 and learn how
to connect the dots, take your collaborative environment
to the next level, and enter the era of Social Business.
http://p.sf.net/sfu/lotusphere-d2d
_______________________________________________
ProFTPD Announcements List
<[email protected]>
https://lists.sourceforge.net/lists/listinfo/proftp-announce
Click to expand...
FTP with new mod ready.

Wael
 
[root@sky updatescript]# ./update.script
update.script core invalid. Aborting,
Download update.script again.
 
You must log in or register to reply here.
Back
Top