Unable to install geoip

pppplus

Verified User
Joined
Dec 19, 2008
Messages
518
Hi

I just update my server to php 5.6
But I'm unable to activate GeoIP

I read a lot of google page, but always nothing work.

When I send php -m, there is no geoip module


My installation :

Centos 6.8
php1_release=5.6
php1_mode=php-fpm
php2_release=5.3 (no more used)
php2_mode=php-fpm


My prefer method is to use $_SERVER['GEOIP_COUNTRY_CODE'] as before.
But actually, I've an error if I had (in custom httpd conf)
Code:
GeoIPEnable On
GeoIPDBFile /usr/local/geoip/share/GeoIP/GeoIP.dat
Invalid command 'GeoIPEnable', perhaps misspelled or defined by a module not included in the server configuration

Thanks for your help.
I feel a little dubbious, with this simple problem !
 

pppplus

Verified User
Joined
Dec 19, 2008
Messages
518
thanks zEitEr

Code:
pecl install geoip
downloading geoip-1.0.8.tgz ...
Starting to download geoip-1.0.8.tgz (10,061 bytes)
.....done: 10,061 bytes
5 source files, building
WARNING: php_bin /usr/local/php56/bin/php appears to have a suffix 56/bin/php, but config variable php_suffix does not match
running: phpize56
Configuring for:
PHP Api Version:         20131106
Zend Module Api No:      20131226
Zend Extension Api No:   220131226
shtool at '/tmp/pear/temp/geoip/build/shtool' does not exist or is not executable.
Make sure that the file exists and is executable and then rerun this script.

ERROR: `phpize' failed
I suppose it's simple to solve, but...
 

zEitEr

Super Moderator
Joined
Apr 11, 2005
Messages
13,818
Location
GMT +7.00
PECL in certain cases might not work on DA servers:

- /tmp mounted with noexec
- Mulitple instances of PHP installed.

So use phpize instead with full paths:


Code:
cd <DIR>
/usr/local/php56/bin/phpize
./configure --with-php-config=/usr/local/php56/bin/php-config
make && make install
 

pppplus

Verified User
Joined
Dec 19, 2008
Messages
518
And with the other method :


Code:
]# cd /usr/share/doc/php-pecl-geoip-1.0.8
# phpize
Cannot find config.m4.
Make sure that you run '/usr/local/bin/phpize' in the top level source directory of the module

And the message does not help me
 

pppplus

Verified User
Joined
Dec 19, 2008
Messages
518
Thanks, but same problem

Code:
 /usr/local/php56/bin/phpize
Cannot find config.m4.
Make sure that you run '/usr/local/php56/bin/phpize' in the top level source directory of the module
 

zEitEr

Super Moderator
Joined
Apr 11, 2005
Messages
13,818
Location
GMT +7.00
Correct name for the PECL extension for PHP is geoip. You downloaded something else different.
 

zEitEr

Super Moderator
Joined
Apr 11, 2005
Messages
13,818
Location
GMT +7.00
Here is what I have on CentOS:

Code:
yum -y install GeoIP-devel
and general instructions:

Code:
export PHP_VER=56
export PECL_EXT=geoip
cd /usr/local/src
/usr/local/php${PHP_VER}/bin/pecl download ${PECL_EXT}
tar -zxvf ${PECL_EXT}-*.tgz && cd ${PECL_EXT}-*/
/usr/local/php${PHP_VER}/bin/phpize
./configure --with-php-config=/usr/local/php${PHP_VER}/bin/php-config
make && make install
echo "extension=${PECL_EXT}.so" >> /usr/local/php${PHP_VER}/lib/php.conf.d/90-custom.ini
Full version: https://help.poralix.com/articles/installing-a-pecl-extension-for-php-on-directadmin-server

Regards,
Alex.
 

RoseHosting

Verified User
Joined
Feb 17, 2017
Messages
18
You can try to change the tmp directory

Code:
mkdir /opt/tmp 
pecl config-set temp_dir /opt/tmp && pear config-set temp_dir /opt/tmp

pecl install geoip
 

pppplus

Verified User
Joined
Dec 19, 2008
Messages
518
Here is what I have on CentOS:
Alex.
Hi
For php 7.1, it doesn't work, because geoip 1.0.8 send errors.
I see it's ok with beta version 1.1.1.

So, I do replace your line
/usr/local/php${PHP_VER}/bin/pecl download ${PECL_EXT}
by
wget https://pecl.php.net/get/geoip-1.1.1.tgz


And it works perfectly ! Thanks a new time !

And for those searching long time.... do not forget to restart php71 (service httpd restart is not enough !!)
 

pppplus

Verified User
Joined
Dec 19, 2008
Messages
518
Hi

I've a new problem with PHP 7.3 and geoip


# php -v
PHP Warning: PHP Startup: geoip: Unable to initialize module
Module compiled with module API=20170718
PHP compiled with module API=20180731


Installation write with 20180731 !!
So, I don't understand.


Here my installation :

Code:
[root@myhost108 ~]# export PHP_VER=73
[root@myhost108 ~]# export PECL_EXT=geoip
[root@myhost108 ~]# cd /usr/local/src
[root@myhost108 src]# wget https://pecl.php.net/get/geoip-1.1.1.tgz 
[root@myhost108 src]# tar -zxvf ${PECL_EXT}-*.tgz && cd ${PECL_EXT}-*/
[root@myhost108 geoip-1.1.1]# /usr/local/php${PHP_VER}/bin/phpize
Configuring for:
PHP Api Version:         20180731
Zend Module Api No:      20180731
Zend Extension Api No:   320180731
[root@myhost108 geoip-1.1.1]# ./configure --with-php-config=/usr/local/php${PHP_VER}/bin/php-config
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for a sed that does not truncate output... /bin/sed
checking for cc... cc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether cc accepts -g... yes
checking for cc option to accept ISO C89... none needed
checking how to run the C preprocessor... cc -E
checking for icc... no
checking for suncc... no
checking whether cc understands -c and -o together... yes
checking for system library directory... lib
checking if compiler supports -R... no
checking if compiler supports -Wl,-rpath,... yes
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking target system type... x86_64-pc-linux-gnu
checking for PHP prefix... /usr/local/php73
checking for PHP includes... -I/usr/local/php73/include/php -I/usr/local/php73/include/php/main -I/usr/local/php73/include/php/TSRM -I/usr/local/php73/include/php/Zend -I/usr/local/php73/include/php/ext -I/usr/local/php73/include/php/ext/date/lib
checking for PHP extension directory... /usr/local/php73/lib/php/extensions/no-debug-non-zts-20180731
checking for PHP installed headers prefix... /usr/local/php73/include/php
checking if debug is enabled... no
checking if zts is enabled... no
checking for re2c... no
configure: WARNING: You will need re2c 0.13.4 or later if you want to regenerate PHP parsers.
checking for gawk... gawk
checking for geoip support... yes, shared
checking for geoip files in default path... found in /usr
checking for GeoIP_open in -lGeoIP... yes
checking for GeoIP_setup_custom_directory in -lGeoIP... yes
checking for GeoIP_set_charset in -lGeoIP... yes
checking for GeoIP_continent_by_id in -lGeoIP... yes
checking for GeoIP_addr_to_num in -lGeoIP... yes
checking whether GEOIP_NETSPEED_EDITION_REV1 is declared... yes
checking whether GEOIP_ACCURACYRADIUS_EDITION is declared... yes
checking for LGPL compatible GeoIP libs... expr: non-integer argument
cannot detect
checking library features to determine version (not acurate)... found 1005000
checking for ld used by cc... /bin/ld
checking if the linker (/bin/ld) is GNU ld... yes
checking for /bin/ld option to reload object files... -r
checking for BSD-compatible nm... /bin/nm -B
checking whether ln -s works... yes
checking how to recognize dependent libraries... pass_all
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking the maximum length of command line arguments... 1572864
checking command to parse /bin/nm -B output from cc object... ok
checking for objdir... .libs
checking for ar... ar
checking for ranlib... ranlib
checking for strip... strip
checking if cc supports -fno-rtti -fno-exceptions... no
checking for cc option to produce PIC... -fPIC
checking if cc PIC flag -fPIC works... yes
checking if cc static flag -static works... no
checking if cc supports -c -o file.o... yes
checking whether the cc linker (/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no

creating libtool
appending configuration tag "CXX" to libtool
configure: creating ./config.status
config.status: creating config.h
config.status: config.h is unchanged
[root@myhost108 geoip-1.1.1]# make && make install
/bin/sh /usr/local/src/geoip-1.1.1/libtool --mode=install cp ./geoip.la /usr/local/src/geoip-1.1.1/modules
cp ./.libs/geoip.so /usr/local/src/geoip-1.1.1/modules/geoip.so
cp ./.libs/geoip.lai /usr/local/src/geoip-1.1.1/modules/geoip.la
PATH="$PATH:/sbin" ldconfig -n /usr/local/src/geoip-1.1.1/modules
----------------------------------------------------------------------
Libraries have been installed in:
   /usr/local/src/geoip-1.1.1/modules

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the `LD_RUN_PATH' environment variable
     during linking
   - use the `-Wl,--rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to `/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------

Build complete.
Don't forget to run 'make test'.

Installing shared extensions:     /usr/local/php73/lib/php/extensions/no-debug-non-zts-20180731/
[root@myhost108 geoip-1.1.1]# service httpd restart
Redirecting to /bin/systemctl restart httpd.service
[root@myhost108 geoip-1.1.1]# php -v
PHP Warning:  PHP Startup: geoip: Unable to initialize module
Module compiled with module API=20170718
PHP    compiled with module API=20180731
These options need to match
 in Unknown on line 0
PHP 7.3.0 (cli) (built: Dec  8 2018 22:52:30) ( NTS )
Copyright (c) 1997-2018 The PHP Group
Zend Engine v3.3.0-dev, Copyright (c) 1998-2018 Zend Technologies
    with Zend OPcache v7.3.0, Copyright (c) 1999-2018, by Zend Technologies

Do you have an idea ?
Thanks
 

pppplus

Verified User
Joined
Dec 19, 2008
Messages
518
Thanks zEitEr



Code:
# /usr/local/php73/bin/php -i | grep extension_dir
PHP Warning:  PHP Startup: geoip: Unable to initialize module
Module compiled with module API=20170718
PHP    compiled with module API=20180731
These options need to match
 in Unknown on line 0
extension_dir => /usr/local/php73/lib/php/extensions/no-debug-non-zts-20180731 => /usr/local/php73/lib/php/extensions/no-debug-non-zts-20180731
sqlite3.extension_dir => no value => no value
 

pppplus

Verified User
Joined
Dec 19, 2008
Messages
518
Code:
# grep geoip.so /usr/local/php73/lib/php.conf.d/*.ini
/usr/local/php73/lib/php.conf.d/90-custom.ini:extension=/usr/local/php73/lib/php/extensions/no-debug-non-zts-20180731/geoip.so
It was : extension=geoip.so
I try with complete path, but same result.
 

zEitEr

Super Moderator
Joined
Apr 11, 2005
Messages
13,818
Location
GMT +7.00
I tried on my own and it succeeded.

What you get?

Code:
find /usr/local/php*/ -name geoip.so -exec ls -la {} \;
Code:
grep geoip.so /usr/local/php73/lib/php.ini
 

pppplus

Verified User
Joined
Dec 19, 2008
Messages
518
Hi zEitEr

Code:
# find /usr/local/php*/ -name geoip.so -exec ls -la {} \;
-rwxr-xr-x 1 root root 83608 Dec 11 23:51 /usr/local/php73/lib/php/extensions/no-debug-non-zts-20180731/geoip.so
Code:
# grep geoip.so /usr/local/php73/lib/php.conf.d/*.ini
/usr/local/php73/lib/php.conf.d/90-custom.ini:extension=geoip.so
 

zEitEr

Super Moderator
Joined
Apr 11, 2005
Messages
13,818
Location
GMT +7.00
The last grep command differs, please check it against /usr/local/php73/lib/php.ini

I wonder if you try to load geoip.so somewhere else.

And if you remove extension= with geoip.so from /usr/local/php73/lib/php.conf.d/90-custom.ini will you still have the error.
 
Last edited:
Top